cInsert an SD memory card into the SD memory card
slot.
vAttach the cover and tighten the screw.
bClose the front cover.
16
zOpen the front cover.
xDetach the SD memory card slot cover by loosening the
screw.
Insert/Remove an SD Memory Card
LINK
RCVSND
OPERATE
Network Interiace Unit WJ-NT304
Front cover
LINK
RCV SND
OPERATE
SD memory card slot cover
LINK
RCV SND
OPERATE
SD memory card slot

■How to remove the SD memory card

Important:
• Before removing the SD memory card, select "Not use" for "About SD memory card" on the [SD memory card] tab of "Basic
Setup" on the setup menu first. (☞Network Operating Instructions (PDF)
zOpen the SD memory card slot cover by following steps
1 and 2 of the "How to insert an SD memory card" sec-
tion.
xRelease the locked SD memory card by pushing the
card and then pull the SD memory card from the slot.
cAttach the cover and tighten the screw.
vClose the front cover.

■How to insert an SD memory card

Important:
• Before inserting a SD memory card, make sure that the power of the unit is turned off.