PRECAUTIONS
1.Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user serviceable parts inside. Ask a qualified service person for servicing.
2.Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handling or storage.
3.Do not expose the camera to rain or moisture, or try to operate it in wet areas.
This model is produced for indoor use. If the cam- era is exposed to rain or moisture, turn the power off immediately and ask a qualified service person for servicing. Moisture can damage the camera and also create the danger of electric shock.
4.Do not use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty.
In case the dirt is hard to remove, use a mild detergent and wipe gently.
5.Never face the camera towards the sun.
Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused.
6.Do not use chemical e.g. thinner or benzene for cleaning the lens.
When the lens becomes dirty, wipe it using a soft cloth or a cloth soaked with alcohol. Using chemi- cal e.g. thinner or benzene for cleaning the lens may damage the surface of the lens.
7.Do not operate the camera beyond the specified temperature, humidity or power source ratings.
Use the camera under conditions where tempera- ture is between −10°C - +50°C (14°F - 122°F), and
humidity is below 90%. The input power source is 12V DC.
Caution:
To prevent fire or electric shock hazard, a UL listed wire
