Panasonic WV-CF202 DC Power Input Connector, Video Output Connector, Cable Exit, Lens, Dome Cover

qDC Power Input Connector

This connector is for connecting the 12V DC power supply cable.

wVideo Output Connector

This connector is for connecting with the VIDEO IN connector of the monitor.

eCable Exit

Pass the cables through this concave when installing on the ceiling/wall.

rCamera Mounting Screw Holes

Mount the camera by fixing with screws through these holes.

tLens

Rotate this lens to adjust the focus.

yRubber Cap (standard accessory)

Attach this cap on the camera mounting screw hole.

uDome Cover

This protects the camera head.

iPanel Cover

Open this cover when installing the camera or con- necting the cables.

-5-

oCamera Head

This adjusts the tilting angle of the camera.

!0Lens Holder

These holders bring the picture in an upright posi- tion on the monitor screen.

!1Panning Table

This adjusts the panning angle of the camera.

!2Cable Hole

Pass the cables through this hole when installing on the ceiling/wall.

!3Panel Cover Detaching Slit

Insert a tool, such as a screwdriver (−), into this slit to open the panel cover.

Cautions:

•Connect to 12 V DC (10.5 V-16 V) class 2 power supply only. Make sure to connect the grounding lead to the GND terminal when the power is supplied from a 12 V DC power source.

•To prevent fire or electric shock hazard, use a UL listed wire VW-1, style 1007 cable for the Input Terminal.