Color CCTV Camera
Operating Instructions
ModelBefore attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
|
|
|
|
|
|
|
i |
|
| ADE03S |
| 2 3 |
|
|
|
|
| |||
o |
|
|
| |||
!0 |
| ON |
| 1 |
| |
|
|
|
| |||
|
|
|
|
|
|
|
|
| O |
| 1 | N |
| 2 | A |
| D | |
e |
| E |
| 3 | 0 |
| 3 | |
|
| S |
y
qCamera Panel
w
!1
u
ON | OFF |
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO
VICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral trian- gle, is interned to alert the user to the presence of uninsulated "dan- gerous voltage" within the product's enclosure that may be of sufficient
SA 1965 magnitude to constitute a risk of electric shock to persons.
The exclamation point within an |
equilateral triangle is intended to |
alert the user to the presence of |
important operating and mainte- |
For U.S.A
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ- ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manu- al, may cause harmful interference to radio com- munications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
The serial number of this product may be found on the top of the unit.
You should note the serial number of this unit in the space provided and retain this instruction as a per- manent record of your purchase to aid identification in the event of theft.
wPan/Tilt/Azimuth Table
Adjusts the panning/tilting and azimuth angle of the camera.
eFocus Lever
Fixes the focus position after adjusting.
rZoom Lever
Fixes the zoom position after adjusting.
tVideo Jack
For connecting an LCD monitor to adjust the camera images. Use an
yVideo Output Connector
Supplies the video output signals. The sig- nals will be interrupted when the video jack is connected to an LCD monitor.
uPower Cable
Supplies 24 V AC or 12 V DC from an exter- nal power source.
|
|
|
|
| 3 | |
AP | SHARP* | SOFT |
| |||
|
| |||||
|
|
|
|
| 2 | |
BLC | ON | OFF* | ON | |||
| ||||||
|
|
|
| 1 | ||
SYNC | INT* | LL | ||||
|
| |||||
iAperture Level Selector
SHARP: Sharpens the image outline.
SOFT: Softens the image outline. The default setting is SHARP.
oBack Light Compensation Selector
ON: Compensates the background if it is brighter than the object.
OFF: Does not compensate. The default setting is OFF.
!0Synchronization Mode Selector Specifies a source for synchronization. INT: Internal 2:1 interlace.
LL:
Note: Do not set the switch to LL (Line- Lock) position when supplying 12 V DC to avoid synchronization error.
!1Panel Cover
| nance (servicing) instructions in the |
| literature accompanying the appli- |
SA 1966 | ance. |
|
Model No. |
Serial No.
INSTALLATION
■Installation Plans & Preparations
■Mounting the Camera
WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
PREFACE
The | The camera features a high picture quality |
designed for use in video surveillance systems. | thanks to the use of digital signal processing |
| LSIs, and easy mounting on the ceiling or wall. |
PRECAUTIONS
The camera can be installed on a junction box or directly on the wall/ceiling.
Front / Upper
|
|
|
| 46 mm |
|
|
|
|
|
|
| ||
|
|
|
|
|
| |
|
|
|
|
|
| |
ø135 mm | 32.5 mm |
| 83.5 mm | |||
|
|
|
|
| Cable access hole | |
|
|
|
|
| ø18 mm (11/16") | |
Disassembly of the camera
1.Remove the panel cover with a Phillips screwdriver.
2.Turn the panel cover
3. Remove the panel cover.
1.This product should be installed and con- nected by qualified service personnel or system installers in conformity with NEC.
2.Use a class 2 power source supplying 12 V DC or 24 V AC.
3.To prevent fire or electric shock hazard, use a UL listed cable
4.Be sure to use a ceiling board/wall having enough strength to support this camera.
5.Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no
6.Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be dam- aged by improper handling or storage.
7.Do not use strong or abrasive detergents.
Use a dry cloth to clean the camera body when dirty.
In case the dirt is hard to remove, use a mild detergent and wipe gently. Afterwards, wipe off the remaining deter- gent with a dry cloth.
8.Clean the lens faceplate with care.
Do not clean the lens with strong or abra- sive detergents. Use lens tissue or a cotton tipped applicator and ethanol.
9.Never face the camera towards the sun. Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused.
10.Do not operate the camera beyond its specifications.
Use the camera under conditions where temperature is between
11.Use a monitor whose resolution is at least equal to that of the camera.
| Sideway cable exit |
|
1. | Locally procure four |
|
| screws suitable for the installation surface |
|
| and structure of the wall/ceiling or junction |
|
| box. There are four 4.5 mm (3/16”) diame- |
|
| ter screw holes and a guide hole on the |
|
| camera panel. |
|
2. | Preparations |
|
• | When planning to use a junction box, pro- |
|
| cure one locally that meets the dimensions |
|
| in the figure. |
|
• | When directly mounting on the wall/ceiling, |
|
| prepare a space which is ø135 mm or larg- |
|
| er. |
|
3. | Cable route |
|
• | When using a junction box, cables will go |
|
| behind the junction box via the cable | 4. Remove the inner dome. |
| access hole on the camera panel. | |
|
| |
• | When directly mounting on the wall/ceiling, |
|
| you need to cut out the panel cover to |
|
| make a sideway exit for cables. |
|
