Color CCTV Camera
Operating Instructions
Model No.WV-CF224EX
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use. The model numbers in these Operating Instructions are given without suffix.
10.Never face the camera towards the sun. Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused.
11.Do not operate the camera beyond its specifications.
Use the camera under conditions where temperature is between
12.Use a monitor whose resolution is at least equal to that of the camera.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
q
Caution:
Before attempting to operate this product, please read the label on the surface of the unit.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
This Class A digital apparatus complies with Canadian
For U.S.A
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ- ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
i |
|
| ADE03S |
| 2 3 |
|
|
| |||
o |
|
| |||
!0 |
| ON |
| 1 | |
|
|
| |||
w
|
| O |
| 1 | N |
e | 2 | ADE03S |
3 |
| |
r |
|
|
t |
| !1 |
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO
TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral trian- gle, is intended to alert the user to the presence of uninsulated "dan- gerous voltage" within the product's enclosure that may be of sufficient
SA 1965 magnitude to constitute a risk of electric shock to persons.
| The exclamation point within an |
| equilateral triangle is intended to |
| alert the user to the presence of |
| important operating and mainte- |
| nance (servicing) instructions in the |
| literature accompanying the appli- |
SA 1966 | ance. |
|
and used in accordance with the instruction manu- al, may cause harmful interference to radio com- munications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
The serial number of this product may be found on the surface of the unit.
You should note the serial number of this unit in the space provided and retain this instruction as a per- manent record of your purchase to aid identification in the event of theft.
Model No.
Serial No.
y
qCamera Panel
wPan/Tilt/Azimuth Table
Adjusts the panning/tilting and azimuth angle of the camera.
eFocus Lever
Fixes the focus position after adjusting.
rZoom Lever
Fixes the zoom position after adjusting.
tVideo Jack (3.5-diam. mini jack)
For connecting an LCD monitor to adjust the camera images. Use an
u
| ON | OFF |
|
| ||
|
|
|
|
| 3 | |
AP | SHARP | SOFT |
| |||
|
| |||||
|
|
|
|
| 2 | |
BLC | ON | OFF | ON | |||
| ||||||
|
|
|
| 1 | ||
SYNC | INT | LL | ||||
|
| |||||
iAperture Level Selector [AP] SHARP: Sharpens the image outline. SOFT: Softens the image outline. The default setting is SHARP.
o Back Light Compensation Selector |
[BLC] |
ON: Compensates the background if it is |
brighter than the object. |
OFF: Does not compensate. |
The default setting is OFF. |
WARNING:
•This apparatus must be earthed.
•To prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture.
•The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be placed on the apparatus.
•All work related to the installation of this product should be made by qualified service personnel or system installers.
PREFACE
yVideo Output Connector
Supplies the video output signals. The sig- nals will be interrupted when the video jack is connected to an LCD monitor.
uPower Cable
Supplies 24 V AC or 12 V DC from an exter- nal power source.
!0Synchronization Mode Selector [SYNC] Specifies a source for synchronization. INT: Internal 2:1 interlace.
LL:
Note: Do not set the switch to LL (Line- Lock) position when supplying 12 V DC to avoid synchronization error.
!1Panel Cover
The | tems. The camera features a high picture quali- |
era designed for use in video surveillance sys- | ty thanks to the use of digital signal processing |
| LSIs, and easy mounting on the ceiling or wall. |
INSTALLATION
PRECAUTIONS
■Installation Plans & Preparations
The camera can be installed on a junction box or directly on the wall/ceiling.
2. Preparations
• When planning to use a junction box, pro- |
cure one locally that meets the dimensions |
in the figure. |
1.This product should be installed and con- nected by qualified service personnel or system installers in conformity with NEC.
2.Use a class 2 power source supplying 12 V DC or 24 V AC.
3.To prevent fire or electric shock hazard, use a UL listed cable
4.Be sure to use a ceiling board/wall having enough strength to support this camera.
5.Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no
6.Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be dam- aged by improper handling or storage.
7.Do not expose the camera to rain or moisture, or try to operate it in wet areas.
This product is designed for indoor use or locations where it is protected from rain and moisture.
Turn the power off immediately and ask a qualified service personnel for servicing. Moisture can damage the camera and also create the danger of electric shock.
8.Do not use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera body when it is dirty.
In case the dirt is hard to remove, use a mild detergent and wipe gently. Afterwards, wipe off the remained part of the detergent in it with a dry cloth.
9.Clean the lens faceplate with care.
Do not clean the lens with strong or abra- sive detergents. Use lens tissue or a cotton tipped applicator and ethanol.
Front / Upper
|
|
|
| 46 mm |
|
|
|
|
|
|
| ||
|
|
|
|
|
| |
|
|
|
|
|
| |
ø135 mm | 32.5 mm |
| 83.5 mm | |||
|
|
|
|
| Cable access hole | |
|
|
|
|
| ø18 mm {11/16"} | |
Sideway cable exit
1.Locally procure four
• When directly mounting on the wall/ceiling, |
prepare a space which is ø135 mm {ø5- |
5/16"} or larger.
3. Cable route
•When using a junction box, cables will go behind the junction box via the cable access hole on the camera panel.
•When directly mounting on the wall/ceiling, you need to cut out the panel cover to make a sideway exit for cables.
