39
Settings>Calibrate Touch Screen If you notice that the touch screen is not responding accurately, you may need to
re-calibrate the touch screen sensors.
1. Select Settings from the Application Quick Launch Bar, tap Calibrate.
2. Tap Calibrate to perform the calibration.
3. When the pop-up windows appear, use a pointed device to accurately tap the
“+” in the designated spots on the screen.
4. If calibration is successful, you can resume normal use. If unsuccessful,
repeat the calibration again.
In order to connect to the Internet, you must have a Wi-Fi network set up on your
pandigital novel.
1. Select Settings from the Application Quick Launch Bar, tap Network.
2. The device scans and lists all local Wi-Fi Networks found. A indicates
secure networks that require login name/password to connect.
3. Tap the desired network to which you want to connect, enter the Network
Password if applicable.
4. Tap to close the Settings screen.
If your Wi-Fi network is set as hidden, it won’t be found by the auto scan. Tap
Other and then enter the network name and key,
tap Save.
(Advanced): After saving the Wi-Fi network, you can change your network
settings by selecting Manual Setup, and then follow the prompts.
Connecting to Public Wi-Fi Hotspot
If you are connecting via a public Wi-Fi hotspot, it may be necessary to
immediately launch the browser and provide the hotspot login information
prior to having an active internet connection.
1. Follow steps 1-5 above to select the hotspot Wi-Fi network.
2. Select Web from the Application Quick Launch Bar.
3. Enter the login information as required by the hotspot.
Turn Wi-Fi Off
There may be times when you want to prevent your device from connecting
to a Wi-Fi network, even if you’ve set the network up on your device.