Battery

Inserting your battery

Put the contacts of the battery into the hole located at the bottom of the unit, as shown in the following picture.

Press the upper side of the battery until you hear the “click”.

Removing your battery

Push the battery-lock key up and remove the battery.

Charging your battery

Your phone uses a Li-Ion battery. Make sure to use an authorized battery and charger only. For more details, please inquire at your nearest dealer.

You can use your phone when the battery is being recharged.

When the battery is inserted in your phone, open the protective cover located on the bottom of your phone and connect the charger adapter, as shown below. A suitable adapter is supplied with your phone.

When your battery is fully charged, remove the adapter connection from the outlet, then disconnect the adapter from your phone by pressing the adapter’s side buttons and pulling the adapter away from your phone, as shown below.

Tip Your phone is powered by a Lithium Ion (Li-Ion) battery. This means that, unlike other forms of battery technology, you can recharge your battery while some charge remains without reducing your phone’s autonomy due to the “battery memory effect” inherent in those technologies.

Do not use a damaged battery or charger.

Use your battery for the specified purpose only.

The closer you are to your network’s base station, the longer your phone usage time because less battery power is consumed for the connection.

The battery recharging time varies depending on the remaining battery capacity and the battery and charger type you use.

16

Page 17
Image 17
Pantech C3 manual Battery, Inserting your battery, Removing your battery, Charging your battery