SPRING PIN |
FIGURE 6 |
STEP 6:
•The 100 LEG PRESS is equipped with a spring pin adjustment to accommodate different sized users and allow easy entry and exit from the machine. To use, you must slightly push against the foot plates to take tension off the pin.
•Before setting the correct amount of tension in the cables, push the HEAD PLATE down, insert the WEIGHT SELECTOR PIN, and perform several repetitions at the leg press station. This will relax the cable system and prevent the HEAD PLATE from lifting up.
•If CABLE ADJUSTMENT is needed, adjust the 100 LEG PRESS into the last adjustment hole (so the LEG PRESS is spread out) and reference the 220 GYM SYSTEM assembly instructions.
THIS CONCLUDES THE ASSEMBLY OF THE 221 LEG PRESS ADAPTER KIT
Thank you for purchasing the Parabody 221 Leg Press Adapter Kit. If unsure of proper use of equipment, call your local Parabody distributor or call the Parabody customer service department at (800)
10
