ParaBody 350104, 336101 manual

NOTE: THE LEG PRESS ATTACHMENT(832101) MUST BE ASSEMBLED BEFORE ASSEMBLING TO THE PARABODY 350. PLEASE ASSEMBLE THE LEG PRESS ATTACHMENTAT THIS TE~IE USING THE 832 PRODUCTASSEMBLYINSTRUCTIONS.

Insert two (2) 2 SQ. IN. PAKABODYCOVERCAPS onto the BASE CONNECTIONWELDMENT shown on drawing.

Removemiddle 4-1/2X I IN. PULLEY,3/8.X 1-3/4 IN. BOLT,and 3/8 IN. LOCK]xrUT from the 350 BASE.

3o

4.

o

o

I0.

Kemove the SECONDARY(LOWER) CABLEfrom the 350.

NOTE: The SECONDARY(LOWER) CABLEwill no longerbe needed.

SECURELYassemble the BASECONNECTIONWELD1VIENTto the 832 using two (2) 3/8 X 3 IN. BOLTS,four (4) 3/8 IN. WASHEILS,and two (2) 3/$ IN. LOCKNUTS.

LOOSELYassemble one {I) 4-112 X ) IN. PULLEY,from step 2, to the lower hole on th¢t right side the BASECONNECTIONWELDMENTusing one (1) 3/8 x 2 IN. BOLT, one (1) 2-718 IN. CABLE

RETAININGCLIP, and one (I) 3/8 IN. LOCKNUT.

LOOSELYassemble one (1) 3-1/2 X 1 IN. PULLEYto the upper hole on the left side ofl~e BASE CONNECTIONWELDMENTusing one (1) 3/8 x 2 IN. BOLT, one (1) 2-3/8 IN. CABLERETAINING

CLIP, and one (I) 3/8 IN. LOCKNUT,

LOOSELYassemble one (1) 3-1/2 X 1 IN. PULLEYto the middle pulley fiat of the 350 BASEusing one

(1) 3/8 x 2 IN. BOLT,one (1) 2-3/8 IN. CABLERETAININGCLIP, and one (1) 3/8 IN. I.,OCK

SECURELYattach the BASECONNECTIONWELDMENTand the 832 to the base of the 350 using two(2) 3/8 X 3 IN. BOLTS,four (4) 3/8 IN. WASHEKS,and two C2) 3/8 IN. LOCKNUT;S.

Following the cable routing diagram, thread the LEGPRESSCABLEfrom the SWIVELLOWROW through the BASECONNECTIONWELDMENTand around the pulley in the 832. (The pulley, wheels, and spacers mayneed to be temperately" removed) and to the ezra on the LEGCURL/EXT.

11.SECUREend of LEGPRESSCABLEto the cam using the hardware removed in step 3.

12.SECURELYtighten all pulley connections, making sure that the CABLERETAININGCLIPSare facing the correct direction as shownin drawing.

13.If uponcompletionof assembly,the head plate does not sit on top of first weightplate or there is excess slack in the cable system, refer to your 350 ASSEMBLYINSTKUCTIONS(NOTE:.Some slack in the

cable system is needed to allow for pre-streteh adjustment in the 832 leg press.)

Part # 6638101 2 Revision: 06/03/96