ParaBody 661101 manual Base Washer

FIGURE 4

BASE

HEXNUT

3/8” LOCK NUT

SWIVEL SNAP

3/8” THREADED SHAFT

2

3/8” LOCK NUT

HEXNUT

SWIVEL SNAP

STEP 4

•Assemble the two previously removed 3/8” HEX NUTS, two previously removed SWIVEL SNAPS, one 3-1/2” PULLEY (2), and two previously removed 3/8” LOCK NUTS to the previously removed 3/8” THREADED SHAFT as shown in FIGURE 4.

	3/8” X 2” BOLT
BASE
	3/8” WASHER
4-1/2” PULLEY
2-7/8” L-BRACKET
3/8” WASHER
FIGURE 5	3/8” LOCK NUT
STEP 5

•Remove one 3/8 X 2” BOLT, two 3/8” WASHERS, one 2-7/8” L-BRACKET, one 4-1/2” PULLEY, and one 3/8” LOCK NUT from the upper flat on the BASE as shown in FIGURE 5.

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5	6

6