ParaBody 822 manual 11 3/8 X 2-3/4

	5
	16
3	4
	8
	9
FIGURE 2	11 3/8 X 2-3/4”

STEP 2:

•Insert two 2” SQ. END CAPS (16) into the ends of the BASE (4) as shown in FIGURE 2.

•SECURELY assemble the PAD (5) to the MAIN PAD SUPPORT (3) and BASE (4) using two 3/8” X 2-3/4” BOLTS (11), two 3/8” LOCK WASHERS (9), two 3/8” WASHERS (8). See FIGURE 2.

	14
	14
18	17
	3
FIGURE 3

STEP 3:

•Apply eight 1-3/4 X 3/4" PARAGLIDES (18) to the INSIDE of the MAIN PAD SUPPORT (3) as shown in FIGURE 3. (NOTE: Throughly clean the inside surface before attaching PARAGLIDES.)

•Securely assemb1e one SPRING PIN ASSEMBLY (17) and one THUMBSCREW (14) to the MAIN PAD SUPPORT (3). See FIGURE 3.

•Insert one 2” SQ. END CAP (16) into the end of the tube on the MAIN PAD SUPPORT (3) as shown in FIGURE

3.
		1/2		1/2		1/2		1/2		1/2		1/2
	0		1		2		3		4		5		6

5