14

2

33

 

13

 

FIGURE 2

 

STEP 2:

Insert two 2” SQ. ENDCAPS (13) into the ends of the SEAT FRAME (2) as shown in FIGURE 2.

SECURELY assemble one 3/8” SPRING PIN (33) to the spring pin barrel on the SEAT FRAME (2) as shown in FIGURE 2.

Attach four PARAGLIDE STRIPS (14) to the inside of the SEAT FRAME (2) using the following steps:

Thoroughly clean all surfaces where the PARAGLIDE STRIPS (14) are to be attached.

Remove the PARAGLIDE STRIPS (14) from the paper backing and firmly apply them to all shown surfaces.

5

Page 5
Image 5
ParaBody 832102 manual Step