15.Assemble the BACKPADto the WOLFFSLEEVE,slide the two (2) remaining HINGETABSover the PIN of the WOLFFSLEEVE(ONE ONEACHSl])E) as shown on drawing, and SECURELYassemble each HINGETABto the BACKPADusing two (2) 3/8 X
WASHERS. (MAKE SURE BOTH HINGE TABS ARE UP AGAINST THE OTHER N2INGES)
16.Attach two sets of UPRIGHTLABELS(1 to I2) to the inside surfaces of both UPRIGHT;FRAMES shown on drawing.
8661-02 EXERCISE SET-UP
To perform FLATBENCHEXERCISES,lift the BENCHSLIDEup and set the HEIGHT ADJUSTMENTBARinto the bottom rungs of the UPRIGHTFRAMES.Lower the BENCHSLIDE down on top of the HEIGHTADJUSTMENTBAR. Adjust the WOLFFSLEEVEforward or backward until proper alignment with UPRIGHTSis reached, and tighten THUMBSCREW.
To perform INCLINEPRESSES, lower the BENCHSLIDE down onto the BENCHNRA.ME.Place the HEIGHTADJUSTMENTBARinto the forth or fifth rungs (DEPENDINGONANGLEOF INCLINE) of the UPRIGHTFRAMESAdjust. the WOLFFSLEEVEforward or backward until proper alignment with UPRIGHTSis reached, and tighten THUMBSCREWAdjust. the SEATPAD,by pulling back the
To perform MILITARYPRESSES,lower the BENCHSLIDEdown onto the BENCH:FI.IAlVIE. Place the HEIGHTADJUSTMENTBARinto the fifth rungs of the UPRIGHTFRAMESAdjust. the WOLFFSLEEVEbackward to the last adjustment hole in the BENCHSLIDE, and tighten
THUMBSCREW.
To perform DECLINE PRESSES, and AB CRUNCHESthe OPTIONALLEG CURL/EXTENSION PEDESTALwill be needed. Insert the
BUSHINGon the LEG EXTENSION(AT THE SAMETIME). Insert the LEG EXTENSIONNECK into the UPRIGHTTUBEof the BENCHFRAMEand allow the
To perform SQUATS, (MAKE SURE THAT NO ATTACHMENTSARE IN THE UP]LIGHT TUBE OF THEBENCHFRAME)slide the WOLFFSLEEVEto the front of the BENCHSLIDE. Rotate the BENCHSLIDEup and allow it to rest on the UPRIGHTTUBE.Allow the BACKPAD, to hang down.
(THE HANGINGWEIGHT OF THE BACK PAD WILL KEEP THE BENCH SLI[D]~, FORWARD)
Please follow the WORKOUTMANUALfor the correct way to use this product.
Part # 6611901 | 4 | Revision: 04/30/96 |
