STEP 13:
¯Lift up each GUIDEROD(13) and slide one 1" SHAFTCOLLAR(24) over the bottom of each GUIDEROD(13). Position 1" SHAFTCOLLAR(24) half way up the GUIDEROD(13) and tighten it using a 3/16" Allen wrench- See FIGURE13.
¯Lift up each GUIDEROD(13) and insert them through each BEARINGHOUSING(1) on the SMr]THBARASSEMBLY
(7)then seat GUIDERODS(13) back into the BUSHINGSinthe BASEof the UPRIGHTS(9 & 10). See FIGURE
¯Lift up on the SMITHBARASSEMBLY(7) and lock the HOOKSof the SMITHBARASSEMBL~{(7) onto the CHROME
ANGLES(12). See FIGURE13.
13
