ParaBody 917101 manual Step

FIGURE

STEP 7:

¯Loop C.~BLE ASSEMBLIES(26) around the 4-1/2" PULLEYS(27) and route CABLEASSENEBLY(26) back through UPPER SUPPORT(11)as shown in FIGURE 7.

¯SECURELYassemble the 4-1/2" PUI_LEYS(27) to the UPPERSUPPORT(11) using t~'o 3/8 X 2" BOLTS(18) and 8" LOCKNUTS(22) as: shown in FIGURE

¯Finish the assembly of the UPPERSUPPORT(11) to the LEFT& RIGHTUPRIGHTS(9 & 10) using Bvo 1/2 X 4" BOLTS (17), two 112" W~SHEILS(20), and two 1/2" LOCKNUTS(21) as shown in FIGURE7. (NOTE: MAKESUREC.~BLE INSIDE OF THE112" BOLTAS SHOVI,','N L-N DETAIL.)

¯SECURELY TIGHTEN ALL LOOSE BOLT CONNECTIONS MADETO THIS POINT.

9