ParaBody GS2 manual X 1 -3/4 X 3-3/4

	12
3/8 X 1 -3/4” 27	36
		34
		43
		24
3/8 X 3-3/4” 30
3/8 X 3-3/4” 30	3
FIGURE 17

STEP 17:

•Refer to cable ILLUSTRATION “A” on page 14 for cable routing while installing pulleys.

•Assemble one 3-1/2” PULLEY (24) between BASE PLATES (3) using one 3/8 X 3-3/4” BOLT (30), two 3/8 X 1” SPACERS (43), one 3/8” LOCK NUT (34) and tighten securely.

•Loosely assemble one 3-1/2” PULLEY (24) between the PULLEY PLATES (12) using one 3/8 X 1-3/4” BOLT (27), and one 3/8” LOCK NUT (34).

•Secure end of LOW CABLE (21) using one 3/8 x 3-3/4” BOLT (30), one 3/8” FLAT WASHER (36) and one 3/8” LOCK NUT (34) as shown in FIGURE 17

•Tighten both 3-1/2” PULLEYS (24) located on PULLEY PLATES (12)

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5		6

19