ParaBody PBF502 manual PBFS02 EX500 Vertical Knee Raise ATTACHMENTASSEMBL¥

PBFS02 EX500 VERTICAL KNEE RAISE ATTACHMENTASSEM_BL¥

o

o

Securely attach the DIP SUPPORTFRAMEto the EX500 BASEUNIT'S REARLEFT UPRIGHT using two (2) I/2 X 3-I/2 BOLTS,four (4) 1/2 WASHERSone (1) 8 IN. CONNECTORPLATEtwo 1/2 LOCKWASHERS,and two (2) 1/2 NUTS.

Insert two (2) 2 IN. SQ. ENDCAPSinto each end of the DIP SUPPORTFRAME.

Attach four (4) 5 IN. GRIPS onto the DIP and VKRHANDLESIF. A LUBRICANTIS REQUIRED, RUBBING ALCOHOL THOROUGHLYCOATING THE INSIDE OF THE GRIP IS THE BEST MATERIAL TO USE.

Securely assemble the BACKPADto the DIP SUPPORTFRAME,using two (2) 3/8 X 1-1/4 BOLTS,

two (2) 3/8 LOCKWASHERS,and two (2) 3/8 WASHERSBE. SURETO POSITIONTIlE PAD THAT THE METALHIDEM WELT CLIP IS POSITIONED IN THE DOWNPOSITI.ON.

Securely assemble the two (2) ARMPADSto each side of the DIP SUPPORTFRAME,using four (4)

3/8 X 3 BOLTS,four (4) 3/8 LOCKWASHERS,and four (4) 3/8 WASHERSBE. SURF, "I'O POSITION THE PAD SO THAT THE METAL HIDEM WELT CLIP IS POSITIONED AWAYFROM THE DIP AND VKR HANDLES.

Before assembling the STEPBRACEto the BASEUNIT, loosen bolts on the LEFTand RIGHT UPRIGHTSat the BASE and TOP BOOM.

Loosely assemble the STEP BRACEto the EXS00 BASE UNIT'S WEIGHTSTACKSUPPORT BASE,using two (2) 3/8 X 3 BOLTS,four (4) 3/8 WASHERS,two (2) 3/8 LOCKWASHERS,and

(2) 3/8 NUTS.

Loosely assemble the STEP BRACEto the EXS00 BASEUNIT'S REARLEFT UPRIGHT,using two

(2) I/2 X 3 BOLTS,four (4) 1/2 WASHERS,two (2) I/2 LOCKWASHERS,and two (2) 1/2

Tighten the bolt connections on the STEPBRACE,and re tighten bolts that where loosened from STEP6.

Peel off the paper backing of the ANTI-SKIDSTRI. P and aahere it to the STEPB.u~4.CEapproximately centered on the tube.

11.Insert the two (2) 2 IN. SQ. X 12 GA'. ENDCAPSinto each end of the STEPBRACE.