Manuals / Paradyne / Computer Equipment / Network Card

Paradyne 4000E installation instructions Procedure, Select a Slot for Installation

Models: 4000E

1 20

Download 20 pages 19.04 Kb

Page 8

1.Select a Slot for Installation.

Procedure

1.Select a Slot for Installation.

Although the 4000E is factory shipped with Slot 1 open, interface modules may be installed in any slot, 1–4.

2.Align the interface module with the slot module guides. With the interface module PCB facing up and the interface module model name on the right side of the module faceplate (facing towards you), align the left and right edges of the PCB with the slot module guides of the chosen slot on the 4000E.

Slot Module Guides

INTERFACE MODULE

3.Slide the interface module fFirmly into the chassis. Tighten the fastening screws on the interface module faceplate.

Fastening Screws

8

July 2005

IPD4-A2-GZ40-10

Image 8

Paradyne 4000E installation instructions Procedure, Select a Slot for Installation

Contents

Contents Software and Firmware License AgreementInstallation Instructions INTO THE PARADYNE PRODUCT. BY USING THE PARADYNE PRODUCT YOUderivatives obtained from the Software, including any copy of either. If you have executed a separate written agreement covering the Software supplied to you under this purchase, such separate written agreement shall govern Unpacking and Inspecting the Equipment HANDLING PRECAUTIONS FOR ! STATIC-SENSITIVE DEVICESIntroduction Installation Options Installation on a TabletopInstallation in a Rack RACK MOUNT4000E SIDE VIEW FrontProcedure Installing Your Management ModuleInstalling a Management Module Fastening Screws Installing Your Interface ModulesMANAGEMENT MODULE Slot Module Guides Procedure 1. Select a Slot for InstallationPowering Up Your 4000E BLC ProcedurePOWER LEAD Positive + Terminal DC POWER TERMINALDC Terminal Blocks Ring TerminalPOSITIVEObserve proper polarity Uplink Connections Subscriber LinesProcedure Uplink Moduleconnectors ConnectorsInterface Module B Interface Module A4. Pull the hook-and-loop fastener strap upward, making sure that it is snug against the connector, then pull the strap back down, such that the hook-and-loop fastener layers stick to one another across the top of the connector Securing the Connecting Cables Configuration and ManagementContents DocumentFan Module 4000E FRONT VIEW Fan Module MANAGEMENT MODULE Fan LEDSpecifications Table 1. SpecificationsSpecification Product Documentation OnlineImportant Safety Instructions UNITED STATES - EMI NOTICE IPD4-A2-GZ40-10 Warranty, Sales, Service, and Training InformationCANADA - EMI NOTICE