3. Using the Web Interface
3-22 February 2005 6218-A2-GB20-00
LAN Clients
To add a LAN client, or reserve an IP address for a DHCP client:
Procedure
1. From the Home screen, click on Advanced.
2. Under Advanced, select LAN Clients. If DHCP is used, all DHCP clients are
automatically assigned. If a fixed IP address server is on the LAN and you
want this server to be visible via the WAN, you must add its IP address. Once
the IP address has been added to you can apply Port Forwarding rules to this
IP address.
3. The Apply button will temporarily save these settings. To make the change
permanent, click on Tools and select System Commands. On the System
Commands page, click on Save All.
Figure 3-17. LAN Clients
VLAN
You can use the VLAN (Virtual Local Area Network) screen to match different
VLAN IDs to the LAN ports.
To configure VLANs:
Procedure
1. From the Home screen, click on Advanced.
2. Under Advanced, select VLAN. The VLAN screen appears.
3. Click the appropr iate buttons to assign VLAN IDs to the LAN ports.