3. Using the Web Interface
6218-A2-GB20-00 February 2005 3-41
If you forget your password, you can press and hold the reset to factory defaults
button for 10 seconds. The router will be reset to its factory default configuration
and all custom configurations will be lost.
Figure 3-38. User Management
Update Gateway
You can remotely upgrade the router's firmware from the web interface.
To upgrade the firmware:
Procedure
1. From the Home screen, under the Tools title, click on Update Gateway.
2. Click on Browse, and find the firmware file to download. Make sure this is the
correct file.
3. Click on upgrade firmware. Once the upgrade is complete the CPE will reboot.
You will need to log back onto the CPE after the firmware upgrade is complete.
The firmware upgrade should take less that 5 minutes to complete. If it takes
longer than 5 minutes, something has gone wrong.
Caution: Do not remove power from the router during the firmware upgrade
procedure.