3. Using the Web Interface
6218-A2-GB20-00 February 2005 3-39
Figure 3-36. System Commands
Remote LogThe remote log feature forwards all logged information to a remote PC. The type of
information forwarded to the remote PC depends upon the log level. Each log
message is assigned a severity level, which indicates how seriously the triggering
event affects router functions. When you configure logging, you must specify a
severity level for each facility. Messages that belong to the facility and are rated at
that level or higher are logged to the destination.
For PPPoE and PPPoA connections, you can select Debug if you want to log the
connection information. This is helpful when trying to debug connection problems.
Tabl e 3-2 defines the different severity levels.
Table 3-2. Severity Levels
Severity Level Description
Panic System panic or other condition that causes the router to stop
functioning.
Alert Conditions that require immediate correction, such as a corrupted
system database.
Citical Potentially critical conditions, such as hard drive errors.
Error Error conditions that generally have less serious consequences
than errors in the panic, alert, and critical levels.
Warning Conditions that warrant monitoring.
Notice Conditions that are not errors but might warrant special handling.
Info Events or non-error conditions of interest.
Debug Software debugging messages. Specify this level only if so directed
by your technical support representative.