3. Using the Web Interface
3-38 February 2005 6218-A2-GB20-00
Too ls
The Tools tab provides access to system commands and functions.
Figure 3-35. Tools Screen

System Commands

To make changes permanent, click on Tools (at the top of the page) and select
System Commands. The following commands are used to configure the router:
Save All: Click on this button in order to permanently save the current
configuration of the router. If you do restart the system without saving your
configuration, the CPE will revert back to the previously saved configuration.
Restart: Use this button to restart the system. If you have not saved your
configurations, the router will revert to the previously saved configuration upon
restarting. Connectivity to the unit will be lost. You can reconnect after the unit
reboots.
Restore Defaults: Use this button to restore factory default configuration.
Connectivity to the unit will be lost. You can reconnect after the unit reboots.