Installing the Initial Power Supply
Install the initial power supply into the top slot. (Use the bottom slot for a second power supply, if desired.)
1.Remove power supply from its shipping box. Handle only by the top and bottom edges to avoid damaging the card.
NOTE:
The power I/O card in the rear of the housing delivers ac power for either one, or if needed, two power supplies. The power I/O card is marked with a label indicating the proper voltage.
2.At the front of the housing, use the attached handle on the power supply to carefully slide the card into the top left slot towards the midplane until you feel it connect. Be sure that you slide the card in using the card guides provided on the housing.
Access Carrier |
Fastening
Screw
Power | Fastening | Power |
|
Supply | Screw | Supply |
3.Locate the screw in the top left corner of the power supply. Using a
4
