Installing the Redundant Power Supply
Install the redundant power supply into the bottom slot. Disconnect power before servicing.
1.Unscrew and remove the filler panel to install a redundant power supply.
2.Remove power supply from its shipping box. Handle only by the top and bottom edges to avoid damaging the card.
NOTE:
The power I/O card in the rear of the housing delivers ac power for either one, or if needed, two power supplies. The power I/O card is marked with a label indicating the proper voltage.
3.At the front of the housing, use the attached handle on the power supply to carefully slide the card into the bottom left slot towards the midplane until you feel it connect. Be sure that you slide the card in using the card guides provided on the housing.
4.Locate the screw in the top left corner of the power supply. Using a
Installing a Replacement Power Supply
Install a replacement power supply into either the top or bottom slot. Disconnect power before servicing.
1.Unscrew and remove the current power supply to install a replacement power supply.
2.Remove the new power supply from its shipping box. Handle only by the top and bottom edges to avoid damaging the card.
NOTE:
The power I/O card in the rear of the housing delivers AC power for either one, or if needed, two power supplies. The power I/O card is marked with a label indicating the proper voltage.
3.At the front of the housing, use the attached handle on the power supply to carefully slide the card into the slot towards the midplane until you feel it connect. Be sure that you slide the card in using the card guides provided on the housing.
4.Locate the screw in the top left corner of the power supply. Using a
5
