Paradyne manual EAM2000-12 Circuit Configuration, Management System Configuration Defaults

Management System Configuration Defaults

IP Addresses:		Subnet Mask:	255.255.255.0
IPD12000 slot 13	192.168.254.252	Default Gateway:	0.0.0.0
IPD12000 slot 14	192.168.254.253	In-band Management:	disabled
IPD4000 slot 5	192.168.254.252	Uplink VLAN ID:	0

EAM2000-12 Circuit Defaults

Circ. ID:	n/a	Pri [Priority]:	0
IP Range 1:	0.0.0.0 - 255.255.255.255	Flood:	Upl [Uplink]
IP Range 2:	0.0.0.0 - 0.0.0.0	Frame Type:	CRC [Cyclic Redundancy Check]
Speed:	1,984 kbps	Line Code:	HDB3 [High Density Binary 3]
Protocol:	ALL	Clock Source: Local
Backbone-VLAN:	0
VLAN:	0 - 0

Data Storage

Configuration backup is inherent in the EAM2000-12. Upon initial power up of the IP DSLAM, the default parameters of the EAM2000-12 will remain in place unless changed through NMS. Once changed, new configurations will automatically be recorded in the Random Access Memory (RAM) of the EAM2000-12 and the Non-Volatile Random Access Memory (NVRAM) of the MUM. While data stored in EAM2000-12 RAM will be erased if the unit loses power, data stored within MUM NVRAM will remain intact (even if the unit loses power) unless deliberately cleared or reconfigured.

EAM2000-12 CIRCUIT CONFIGURATION

Circuit configurations common to all Access Module models are defined in the Management User Guide for IP and Mini DSLAMs. Circuit configurations specific to E1 technology are outlined below. Default settings for any of these may be altered via the Circuit Configuration window of Net to Net's Network Management System (NMS).

Speed

There are eight timeslot/bandwidth options for the E1 link; default is 1,984 kbps across all 31 channels. Remote E1 modems determine line speed through their communication with the EAM2000-12.

EAM2000-12 Timeslot & Bandwidth Options

Timeslots 1-4 1-8 1-12 1-16 1-20 1-24 1-28 1-31

Bandwidth (kbps) 256 512 768 1,024 1,280 1,536 1,792 1,984

210-0000036 rev03