ADDITIONAL INFORMATION
LED Indicators
LED |
| State |
| Indication |
| Additional Information |
|
|
|
|
|
|
|
PWR (Power) |
| solid green |
| unit is operational |
| If the Power LED is not illuminated, it is |
|
|
|
|
|
| unlikely the |
|
|
|
|
|
| power and none of the LEDs will be |
|
|
|
|
|
| illuminated. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
E1 LK (Link) | solid green | E1 connection is established |
| pulsing | E1 connection is established and active |
| green |
|
| no | Loss of Synchronization (LOS) |
| illumination | The incoming connection to the port |
|
| has been lost; no data is being |
|
| received. |
|
|
|
E1 RX | flashing | E1 activity |
(Receiving) | amber |
|
| solid amber | heavy Rx traffic |
| no | no activity |
| illumination |
|
|
|
|
|
|
|
E1 TX | flashing | E1 activity |
(Transmitting) | amber |
|
| solid amber | heavy Tx traffic |
| no | no activity |
| illumination |
|
|
|
|
|
|
|
E1 AL (Alarm) | no | E1 is operational |
| illumination |
|
| solid amber | Remote Alarm Indication (RAI) |
|
| The outgoing connection from the port |
|
| has been lost; no data is being |
|
| transmitted. |
| pulsing | Alarm Indication Signal (AIS) |
| amber | An indirect connection has been lost; |
|
| the port may no longer be receiving |
|
| data from the remote E1 modem. |
|
|
|
An E1 link exists and the port may be transmitting data but it is not receiving any packets from the remote E1 modem.
The port is receiving valid data or status packets from the remote E1 modem.
If the outgoing connection from the port has also been lost then the remote E1 modem will have LOS as well.
The port is either receiving data from the remote E1 modem or statistical packets from the IP DSLAM management.
The port is receiving large amounts of data from the remote E1 modem.
A link may exist but the port is not receiving any data from the remote E1 modem.
The port is transmitting data to the remote E1 modem.
The port is transmitting large amounts of data to the remote E1 modem.
A link may exist but the port is not transmitting any data to the remote E1 modem.
Note: If the E1 LK LED also remains unlit then the port has LOS.
The remote E1 modem has lost its incoming connection and has LOS.
The remote E1 modem has lost a connection with an intermediate device and LOS or RAI.
(A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks at a more rapid, less constant rate.)