14OPERATING YOUR MODEL 2100 continued
REMOTE CONTROL FUNCTIONS
The Model 2100 remote control has a maximum range of approximately
On and Off Buttons
These have the same function as the Power button on the front panel. These separate buttons enable programming unambiguous “hard” off and on commands into a system controller or to create a macro sequence for a
Note: The On and Off buttons are disabled when the rear panel Auto Turn On switch is set to 12V or AC.
Mute Button
Pressing the Mute button once mutes the signal at all of the Out jacks except the Record Out. The red Mute light will flash on the front panel while mute is engaged. Press the Mute button a second time to cancel mute.
Volume 
and 
Buttons
These buttons control the rotation of the front panel motorized
Level control to increase and decrease listening volume levels.
Tone On and Off Buttons
Press the Tone On and Off buttons to engage or disengage the bass and treble tone control circuits. The remote lets you hear whether “flat” or adjusted tone sounds better at your favorite listening position.
Note: The remote control cannot make the Bass and Treble adjustments; these adjustments must be made with the Model 2100’s front panel Bass and Treble knobs.
Source Input Buttons
Press the Input button of the source that you wish to hear.
“BURNING-IN” YOUR MODEL 2100
Like many other great high end preamplifiers, your Model 2100 should operate for at least 72 hours with music playing after it is first turned on before it will sound its best. Any volume level is ok. This gives various internal components and wiring a chance to “form” their optimum electron pathways so they can pass complex musical information with greater definition, smoothness and transparency. Although your Model 2100 will sound spectacular when you first turn it on, you will come to appreciate it even more as your listening hours accumulate. You’ll discover additional musical details you may not have known were present.
