Parasound manual MODEL 2100 SPECIFICATIONS AND SETUP NOTES, Frequency Response, THD Distortion

MODEL 2100 SPECIFICATIONS AND SETUP NOTES		19
Audio Specifications	AC Power Requirement

Frequency Response	110-250 V, 50 - 60 Hz
	Voltage is automatically selected
10 Hz – 100 kHz, +0/–3 dB
	5 watts standby; 10 watts when turned on

THD Distortion

< 0.008% at 20 Hz

S/N Ratio

>105 dB, input shorted, IHF A-weighted

>95 dB, input shorted, unweighted

Crosstalk

> 75 dB at 20 kHz

Input Impedance

30k ohms

General Information

Dimensions

Width: 17.25” (437 mm)

Depth: 14.5” (369 mm)

Height, with feet: 4.25” (108 mm)

Height, without feet: 3.5” (89 mm)

Weight: Net: 13 lbs. (5.9 kg)

Shipping: 20 lbs. (9.1 kg)

Output Impedance	Rack Mount Accessory
	RMK22 (May be purchased separately)
< 60 ohms
Input Sensitivity
250 mV for 1 V output
Total Gain: 12 db
Maximum Output: 6.5 V

Notes:

Note: Specifications and features subject to change or improvement without notice.

© 2007 Parasound Products, Inc. Crestron, AMX, Control4, Niles and Elan are registered trademarks. Rev. 0.9