Manuals / Brands / Home Audio / Stereo Amplifier / Parasound / Home Audio / Stereo Amplifier

Parasound P 3 UNBALANCED DIRECT 2 INPUTS, CONNECTING A SOURCE COMPONENT TO THE P, To Connect, What You’ll Need:, Before Connecting, Direct 2 Unbalanced Input Jacks

1 28

Download 28 pages, 2.22 Mb

CONNECTING A SOURCE COMPONENT TO THE P 3

UNBALANCED DIRECT 2 INPUTSDirect 2 Unbalanced Input Jacks

The P 3 Unbalanced Direct 2 input jacks are for your next-best-sounding source component if the Direct 1 input jacks are already connected to another source.

What You’ll Need:

•One pair of shielded interconnect cables with RCA plugs

•A source component with RCA output jacks

Left

Right

RCA Plugs

Before Connecting

Leave the AC cord of the P 3 disconnected until you have made all connections to prevent any surprise burst of sound.

Make sure that all your cables are long enough so they are not strained or stretched once they are connected.

To Connect

1Plug one end of the first cable into the right Direct 2 input jack on the P 3.

2Plug the other end of this cable into the right channel output jack on the source component.

3&4 Repeat steps 1 and 2 for the left channel.

C A U T I O N

2	4	COMPONENTS
		COMPONENTS
Right	Left	FM 87	?
Right	Left	AM 510
	OUTPUTS	TAPE DECK TUNER	AUX
	CD PLAYER	TAPE DECK TUNER	AUX

Contents

Page THANK YOU Congratulations and Thank You for Choosing Parasound The Parasound Staff Keeping Records for Future Reference TABLE OF CONTENTS UNPACKING AND PLACEMENT GUIDELINES FOR THE P CONNECTING A SOURCE COMPONENT TO THE BALANCED DIRECT 1 INPUTS ON THE P CONNECTING A SOURCE COMPONENT TO THE UNBALANCED DIRECT 1 INPUTS ON THE P CONNECTING A SOURCE COMPONENT TO THE P UNBALANCED DIRECT 2 INPUTS Direct 2 Unbalanced Input Jacks CONNECTING A TURNTABLE OR OTHER COMPONENT TO THE AUX INPUTS ON THE P Connecting a Source Component to the Aux Inputs on the P Connecting Another Source Component to the Aux Inputs on the P CONNECTING OTHER SOURCE COMPONENTS TO THE CD AND TUNER INPUTS ON THE P What You’ll Need For Each Input Connection: CONNECTING AN ANALOG TAPE DECK TO THE P CONNECTING AN EXTERNAL SIGNAL PROCESSING COMPONENT TO THE P 3 EXTERNAL LOOP JACKS CONNECTING THE P 3 TO THE BALANCED INPUTS ON CONNECTING THE P 3 TO THE UNBALANCED INPUTS ON YOUR POWER AMPLIFIER CONNECTING AN INFRARED REPEATER SYSTEM TO THE P TURNING ON THE P 3 WITH AN EXTERNAL TRIGGER VOLTAGE TRIGGERING ON ANOTHER COMPONENT FROM THE P 3’S TRIGGER OUTPUT JACK RS232 CONTROL Connecting a Controller to the RS232 Port of the P CONNECTING THE P 3 AC POWER CORD AC Power Connections AC Voltage Selection Switch Turning the P 3 On and Off Adjusting the Volume Level Muting the Main Outputs Selecting the Input Source Adjusting the Balance Level Adjusting Bass and Treble Tone Phones Jack P 3 FRONT PANEL AND REMOTE CONTROL P 3 - T 3 Remote Buttons Controls P 3 Front Panel TROUBLESHOOTING GUIDE Main Power Fuse SERVICING YOUR P If All Else Fails –CallUs for Help Procedure for Returning Your P 3 to Parasound for Service Important Notice - Shipping the P TECHNICALLY SPEAKING Balanced and Unbalanced Input Lines Direct Inputs External Loop In / Out Connections Output Connections 23TECHNICALLY SPEAKING continued DC Trigger Input Jack DC Trigger Output Jack External Remote Input and Loop Out Front Panel Display PARASOUND P 3 DESIGN OVERVIEW Parts Selection The Power Supply Audio Circuit Path Topology Functionality 25PARASOUND P 3 SPECIFICATIONS Frequency Response Maximum Input Level Total Harmonic Distortion Signal-to-NoiseRatio