Parkinson Cowan SLIPIN Fitting The Battery, Pressure Testing, Checking The Grill

Models: SLIPIN

1 40
Download 40 pages 31.42 Kb
Page 37
Image 37
5. FITTING THE BATTERY

The gas bayonet connector must be fitted in the shaded area indicated in Fig. 3. Take into account that it must be possible to pull the appliance forward sufficiently. The hose must not get caught on the stability bracket.

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS. 669 CURRENT EDITION.

L.P.G. FLEXIBLE CONNECTIONS MUST BE OF A TYPE SUITABLE FOR L.P.G. AND CAPABLE OF OPERATION UP TO 50 mbar AND TO CARRY A RED STRIPE, BAND OR LABEL.

250

All dimensions in mm

5. FITTING THE BATTERY

Fig.3

650

400

1.

The battery is located on the left hand side of the front plinth.

Fig.4

2.

To gain access to the battery, open the main oven door and lift

 

up the battery holder lid.

 

3.Fit the battery AA size ensuring the positive, + terminal is next to the (+) sign on the battery holder. See Fig. 4.

4.Close the lid of the battery holder.

6. PRESSURE TESTING

1.The oven injector is used as a pressure test point.

Remove the oven furniture. Remove oven burner box retaining clips (one spring clip from each side) and remove box front cover. Replace one clip back into the right hand side of the burner box. Remove oven burner by removing the spring clip from the right hand side of the oven burner and slide burner off injector, whilst easing it forward and taking care not to strain the F.S.D. phial.

2.Connect the pressure gauge to the oven injector.

3.Check the supply pressure by turning the thermostat on and one hotplate tap full on and light the appropriate burner. The pressure should be either:-

(i) For Natural Gas

20mbar

(ii) For LP.Gas

The pressure must be set to 28 mbar for use on butane or 37

 

mbar for use on propane.

4.Turn off the taps, disconnect the pressure gauge and replace oven burner and cover, ensuring that the F.S.D. phial is correctly located into the bracket on the burner.

5.Check operation of oven.

7. CHECKING THE GRILL

Place the grill pan containing the grid into the grill compartment. Light the grill burner by turning the grill tap full on and pressing the ignition button on the fascia panel. As soon as the burner is lit the button can be released.

37

Page 37
Image 37
Parkinson Cowan SLIPIN installation instructions Fitting The Battery, Pressure Testing, Checking The Grill