General safety advice for electrical power tools

b)Avoid touching earthed surfaces such as pipes, radiators, ovens and refrig- erators with any part of your body.

There is an increased risk of electric shock if your body is earthed.

c)Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock.

d)Do not use the mains lead for

any purpose for which it was not intended, e.g. to carry the device, to hang up the device or to pull the mains plug out of the mains socket. Keep the mains lead away from heat, oil, sharp edges or moving parts of the device. Damaged or tangled mains leads increase the risk of electric shock.

e)When working outdoors with an electrical power tool always use ex- tension cables that are also approved for use outdoors. The use of an extension cable suitable for outdoor use reduces the risk of electric shock.

f)Use a residual current device (RCD) for protection if operating the electri- cal power tool in a moist environment is unavoidable. The use of an RCD reduces the risk of electric shock.

3. Personal safety

a)Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One mo- ment of carelessness when using the device can lead to serious injury.

b)Wear personal protective equipment and always wear safety glasses. The wearing of

personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of elec- trical power tool used and work undertaken, reduces the risk of injury.

c)Avoid unintentional operation of the device. Check that the electrical power tool is switched off before you connect it to the mains, pick it up or carry it. Accidents can happen if you carry the device with your finger on the ON / OFF switch or with the device switched on.

d)Remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury.

e)Avoid placing your body in an unnat- ural position. Keep proper footing and balance at all times. By doing this you will be in a better position to control the device in unforeseen circumstances.

f)Wear suitable clothing. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves clear of mov- ing parts. Loose clothing, jewellery or long hair can become trapped in moving parts.

g)If vacuum dust extraction and collection devices are fitted do not forget to check that they are properly connected and correctly used. The use of these devices re- duces the hazard presented by dust.

4.Careful handling and use of electrical power tools

a)Do not overload the device. Always use an electrical power tool that is intended for the task you are under- taking. By using the right electrical power tool for the job you will work more safely and achieve a better result.

b)Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired.

c)Pull the mains plug from the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device.

8GB/IE

Page 6 Page 8
Page 7
Image 7
Parkside PBS 600 A1 manual General safety advice for electrical power tools, Personal safety, Do not use the mains lead for
Page 6 Page 8

PBS 600 A1 specifications

The Parkside PBS 600 A1 is a versatile and efficient belt sander designed for both amateur woodworkers and DIY enthusiasts. This powerful tool is an integral addition to any workshop, providing an optimal solution for sanding surfaces quickly and effectively.

One of the standout features of the PBS 600 A1 is its robust 600-watt motor, which delivers sufficient power to tackle a variety of projects. It operates at a maximum speed of 380 meters per minute, ensuring that users can complete their sanding tasks with speed and precision. This makes the sander ideal for removing paint, smoothing surfaces, or preparing wood for finishing.

The belt sander is equipped with a 75 x 457 mm sanding belt, providing a broad surface area for maximum efficiency. The adjustable belt tracking system allows for easy modifications, ensuring that the sanding belt remains aligned properly, which in turn prolongs the lifespan of the belt and enhances overall performance.

Another noteworthy characteristic of the Parkside PBS 600 A1 is its ergonomic design. It features a comfortable, rubberized handle that aids in minimizing user fatigue during extended periods of use. The tool is lightweight, which contributes to its maneuverability and ease of handling, allowing users to reach tight spots and corners without hassle.

Safety is also a priority in the design of the PBS 600 A1. It comes with an integrated dust extraction port that can be connected to a vacuum cleaner, significantly reducing airborne dust and ensuring a cleaner working environment. This feature not only promotes safety but also enhances visibility when working on projects.

Versatility is a key theme with this tool, as it is suitable for various materials, including wood, plastic, and metal. The adjustable speed control allows users to select the optimal speed for different surfaces, making it adaptable to various sanding requirements.

Furthermore, the Parkside PBS 600 A1 is an economically friendly choice, as it combines innovative technology with a budget-friendly price point, making high-quality sanding accessible for all homeowners and hobbyists. Its blend of power, precision, and adaptability makes the PBS 600 A1 an essential tool for achieving professional-quality results in sanding applications.
Top Page Image Contents