Preparing for use, Advice on use | Parkside PBS 600 A1 guide

Preparing for use

Tensioning / changing the sanding belt

WARNING! DANGER OF INJURY! Before you carry out any work on the belt sander always pull the plug out of the mains socket.

1.Then release the tensioner for the sanding belt by moving the tensioning lever 10 fully outwards (see ﬁg. C). The sanding belt 8 can be removed.

2.Next insert a new sanding belt 8 or change the belt for one suitable for a diﬀerent material or one with a diﬀerent grit size. IMPORTANT: The direction of the arrows on the inside of the sanding belt 8 must agree with that on sander housing.

3.Press the tensioning lever 10 back into its initial position.

Adjusting the sanding belt path manually: If the belt does not run centrally when switched on, you may have to adjust the sanding belt manually.

To do this, turn the adjuster screw 7 on the front roller until the sanding belt 8 runs centrally. IMPORTANT: Always make sure that the sanding belt 8 does not cut into the housing. Check the sanding belt regularly and if neces- sary re-adjust it using the adjuster screw 7 .

Advice on use

Light sanding pressure is enough:

Apply light sanding pressure only. The weight of the belt sander alone is adequate to produce good sanding results. By adopting this approach you will also prolong the life of your sanding belts and obtain a smoother workpiece surface.

Sanding and surfaces:

The sanding output and the quality of the surface ﬁnish obtained are determined by the belt speed and the grade of grit on the sanding belt (see the section on “Selecting the correct rotational speed and sanding belt”).

Sanding procedure:

With the sander switched on, bring it into con- tact with the workpiece and move it forward carefully. Work in parallel and overlapping widths. Always work in the direction of the grain to avoid undesirable transverse sanding marks. After sanding always lift the device from the workpiece before switching it oﬀ.

Vacuum dust extraction

WARNING! DANGER OF FIRE! There is the danger of ﬁre when working with electrical de- vices that have a dustbox or can be connected to a vacuum cleaner. Under certain conditions the wood dust in the dust collection box (or in the vacuum‘s dust bag) may self-ignite, e.g. as a result of ﬂying sparks generated when abrading metals or metal objects left in wood. This can happen particularly if the wood dust is mixed with paint residue or other chemicals and the abraded particles are hot from prolonged abrasion. Therefore you must empty the device’s dust collection box and the vacuum clean- er’s dust bag before taking a break or stopping work and always avoid overheating of the abraded particles and the device.

Wear a dust mask!

Dust extraction with dust box:

Push the dust box 5 on to the adapter port 9 .

Dismantle / remove the dust box:

Press the release button 6 of the dust box 5 and withdraw it towards the rear of the device.

Adapter for external vacuum extraction (with reducer piece)

WARNING! EXPLOSIVE MATERIAL!

If there is an explosive mixture of dust and air you must use a vacuum device especially intended for that purpose.

DANGER OF FIRE FROM FLYING SPARKS! Do not use any form of dust extraction (dust box 5 or vacuum extraction device) if you are sanding metal.

10 GB/IE

PBS 600 A1 specifications

The Parkside PBS 600 A1 is a versatile and efficient belt sander designed for both amateur woodworkers and DIY enthusiasts. This powerful tool is an integral addition to any workshop, providing an optimal solution for sanding surfaces quickly and effectively.

One of the standout features of the PBS 600 A1 is its robust 600-watt motor, which delivers sufficient power to tackle a variety of projects. It operates at a maximum speed of 380 meters per minute, ensuring that users can complete their sanding tasks with speed and precision. This makes the sander ideal for removing paint, smoothing surfaces, or preparing wood for finishing.

The belt sander is equipped with a 75 x 457 mm sanding belt, providing a broad surface area for maximum efficiency. The adjustable belt tracking system allows for easy modifications, ensuring that the sanding belt remains aligned properly, which in turn prolongs the lifespan of the belt and enhances overall performance.

Another noteworthy characteristic of the Parkside PBS 600 A1 is its ergonomic design. It features a comfortable, rubberized handle that aids in minimizing user fatigue during extended periods of use. The tool is lightweight, which contributes to its maneuverability and ease of handling, allowing users to reach tight spots and corners without hassle.

Safety is also a priority in the design of the PBS 600 A1. It comes with an integrated dust extraction port that can be connected to a vacuum cleaner, significantly reducing airborne dust and ensuring a cleaner working environment. This feature not only promotes safety but also enhances visibility when working on projects.

Versatility is a key theme with this tool, as it is suitable for various materials, including wood, plastic, and metal. The adjustable speed control allows users to select the optimal speed for different surfaces, making it adaptable to various sanding requirements.

Furthermore, the Parkside PBS 600 A1 is an economically friendly choice, as it combines innovative technology with a budget-friendly price point, making high-quality sanding accessible for all homeowners and hobbyists. Its blend of power, precision, and adaptability makes the PBS 600 A1 an essential tool for achieving professional-quality results in sanding applications.

Parkside PBS 600 A1 Preparing for use, Tensioning / changing the sanding belt, Advice on use

Models: PBS 600 A1