Parkside PDKS 120 manual Introduction / Safety advice, Technical data, Working safely

		Introduction / Safety advice
2 x Guide plates	J	Do not use electrical power tools in
2 x Screws		moist or wet surroundings.
10 x Saw blades
1 x Dust blow tube	J Ensure that your working area is well lit.
3 x Threaded feet with nut, washer	J	Do not use electrical power tools in
and retaining ring		areas where there is risk of fire or
1 x Allen key		explosion.
1 x Operating instructions	3.	Protect yourself from electric
		shock.

Q Technical data

Nominal voltage:	230 V ~ 50 Hz
Rated power:	120 W
Short-term operation time:	20 min (S2)
Stroke rate (no load):	n0 400 - 1600 min-1
Max. cut depth 90°:	50 mm
Max. cut depth 45°:	22 mm
Noise data:
A-weighted sound levels.
Sound pressure level:	67,2 dB (A)
Sound level:	80,2 dB (A)
Uncertainty K = 3 dB

Values determined in accordance with EN 61029.

Safety advice

JATTENTION! In order to protect yourself from electric shock, injury or fire when using electrical power tools, please observe the following basic safety precautions. Read all these requirements before you use the electrical power tool, and keep the safety advice in a safe place.

QWorking safely

1.Keep your working area clean and tidy.

JA disorderly working area can lead to accidents.

2.Be aware of the effects of the environment.

JDo not leave electrical power tools out in the rain.

JAvoid touching earthed objects such as pipes, heating radiators, ovens or refrigerators with parts of your body.

4.Keep other people at a safe distance.

JDo not allow other people, in partic-

ular children, to touch the electrical power tool or the mains lead.

Keep them away from your working area.

5.Store currently unused electrical power tools in a safe place.

JWhen not being used electrical power tools should be stored in dry conditions in a high or enclosed place, out of reach of children.

6.Do not overload your electrical power tool.

JBy keeping within the specified working range of the tool you will work more safely and achieve a better result.

7.Use the right electrical power tool for the task.

JDo not use low-output devices for heavy tasks.

JDo not use an electrical power tool for purposes for which it was not intended. For example, do not use a hand operated circular saw for trim- ming tree branches or cutting logs.

8.Wear suitable clothing.

JDo not wear loose-fitting clothing or jewellery. They could become caught on moving parts.

JWe recommend that you wear anti-slip foot- wear when working outdoors.

JIf you have long hair, wear a hair net.

9.Use personal protective equipment.

JWear protective glasses.

JWear a dust mask if your work generates dust.

10. Attach the vacuum dust extraction device.

GB/IE/CY 7