Preparing for use
The way to determine the optimum oscillation speed for your task is to carry out a practical test. Setting 1 = lowest oscillation speed /
Setting max. = highest oscillation speed
Vacuum dust extraction
WARNING! DANGER OF FIRE! There is the danger of fire when working with electrical devices that have a dust box or can be connected to a vacuum cleaner. Under certain conditions the wood dust in the dust extraction bag (or in the vac- uum‘s dust bag) may ignite, e.g. as a result of flying sparks generated when abrading metals or metal objects left in wood. This can happen particularly if the wood dust is mixed with paint residue or other chemicals and the abraded particles are hot from prolonged abrasion. Therefore you must empty the device’s dust collection box and the vacuum clean- er’s dust bag before taking a break or stopping work and always avoid overheating of the abrad- ed particles and the device.
Wear a dust mask!
WARNING! Always pull the mains plug is out of the socket before doing any work on the device.
Adapter for external vacuum extraction (with reducer piece)
Connection:
Push the adapter for external vacuum extrac- tion 7 into the dust extraction spout 4 . When doing this observe the guide markings on the device and adapter. Turn the dust extraction spout to lock in place.
If it is necessary to use the reducer piece 8 , push the reducer piece into the adapter for external vacuum extraction 7 .
Push the hose of a suitable dust extraction de vice approved for that purpose (e.g. a work- shop vacuum cleaner) on to the adapter for
external vacuum extraction 7 or the reducer piece 8 .
Removal:
Pull the hose of the dust extraction device off the adapter for external vacuum extraction 7 . Turn anticlockwise to unlock the dust extraction port 4 .
Pull off the adapter for external vacuum extrac- tion 7 (with the reducer piece 8 if used).
Attaching / detaching sanding sheets
WARNING! Always pull the mains plug is out of the socket before doing any work on the device.
Attaching:
Sanding sheets are attached to the backing plate
6by means of the hook and pile fastening.
Detaching:
Simply pull the sanding sheet off the backing plate 6 (see Fig. B).
Turn the backing plate in 60° steps
WARNING! Always pull the mains plug out of the socket before doing any work on the device.
Turn the backing plate 6 of the delta sander in 60° steps until it engages in the desired position (see Fig. C).
Sanding output and surfaces:
The shape of the delta sander allows you to sand workpieces even in their difficult to access places, corners and edges (see Fig. D).
Sanding performance and surface quality depend on the grade of sanding sheet and the oscillation speed setting.
Always use sanding sheets with grades that are suitable for the particular surface you are sanding. The speed selected should also be appropriate to the task undertaken.
10 GB/IE
