Parkside PFSPS150 manual Introduction / General safety advice, Included items, Technical data

Models: PFSPS150

1 65
Download 65 pages 58.39 Kb
Page 5
Image 5

QIncluded items

1 Electric paint spray gun

3 Nozzles* 1 x 0.6, 2 x 0.8 mm

3 Suction pressure valves*

2 Springs*

1 Cleaning nozzle

1 Nozzle extension

1 Measuring cup

1 Operating instructions

1 Booklet covering „warranty and service“

* 1 x prefitted

Technical data

Rated power:

150 W

Delivery capacity:

400 g / min (water)

Viscosity capacity:

max. 100 DIN-sec

Pressure:

max. 250 bar

Paint cup:

0.7 litre

Protection class:

II / 

Noise and vibration data:

The sound pressure level (A-weighted) of the device is typically 93.9 dB (A).

Uncertainty K=3 dB.

The sound level while working can exceed 106.9 dB (A).

Wear ear protection!

Weighted acceleration, typical: 6.5 m / s2

Warning! The vibration level given in these instructions has been measured in accordance with a standardised measurement procedure and can be used to compare devices.

Different uses of the device give rise to different vibration levels and in many cases they may exceed the values given in these instructions. In some cir- cumstances it is easy to underestimate the vibration load if the electrical power tool is used regularly. Note: If you wish to make an accurate assessment of the vibration loads experienced during a particular

Introduction / General safety advice

period of working, you should also take into account the intervening periods of time when the device is switched off or is running but is not actually in use. This can result in a much lower vibration load over the whole of the period of working.

General safety advice

JCAUTION! Please read all the instructions and advice. Failure to observe the instructions and advice given below may result in electric shock, fire and/or serious injury.

MAKE SURE THAT YOU KEEP THESE INSTRUC- TIONS AND SAFETY ADVICE IN A SAFE PLACE.

1. Your working area

a)Keep your working area clean and clutter-free. Untidy or poorly lit working areas can lead to accidents.

b)Do not work with the device in potentially explosive envi- ronments in which there are

inflammable liquids, gases or dusts. Electrical power tools create sparks which can ignite dusts or fumes.

c)Keep children and other peo- ple away while you are op- erating the electrical power

tool. Distractions can cause you to lose control of the device.

GB 7

Page 5
Image 5
Parkside PFSPS150 manual Introduction / General safety advice, Included items, Technical data, Your working area