Operation

Operation

Switching on and off

Switching on:

Insert the mains plug into a suitable mains socket.

Switching off:

Pull the plug out of the mains socket to switch off the device.

Third hand

CAUTION! DANGER OF BURNS! The clips on the third hand 5 can become hot while you are soldering the workpiece.

1.Fold out the third hand 5 upwards.

2.Rotate the clips 4 until they are oriented in the required direction.

3.Clamp the workpiece between the two clips 4 .

Solder sponge

CAUTION! The hot soldering tip 2 must never be placed in contact with a dry solder sponge 8 , otherwise the solder sponge may be damaged.

The solder sponge 8 is used to clean soldering tips.

Moisten the solder sponge 8 before you use it.

14 GB/IE/CY

Page 13
Image 13
Parkside PLBS 30 manual Switching on and off, Third hand, Solder sponge