Introduction

The following pictograms are used in these operating instructions / on the device:

 

 

 

 

 

 

 

 

 

Read instruction manual!

 

 

 

 

 

 

 

 

 

 

 

Keep children away from electrical

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

power tools!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V~

 

Volt (AC)

 

 

 

 

 

 

 

 

 

 

 

Caution – electric shock!

 

 

 

 

 

 

 

 

 

 

 

 

Danger to life!

W

 

Watts (Effective power)

 

 

 

 

 

 

 

 

 

 

 

For indoor use only!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Direct current

 

 

 

 

 

 

 

 

 

 

 

Risk of loss of life by electric shock from

 

 

 

 

 

 

 

 

 

(Type of current and voltage)

 

 

 

 

 

 

 

 

 

 

 

damaged mains lead or mains plug!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

n0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wear hearing protection, dust

 

Design no-load speed

 

 

 

 

 

 

 

 

 

 

 

protection mask, protective glasses

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and protective gloves.

mA

 

Milliamps / Amps / Amp-hours

 

 

 

 

 

 

 

 

 

 

 

Avoid contact with rapidly

 

 

 

 

 

 

 

 

 

 

 

 

A / Ah

 

 

 

 

 

 

 

 

 

 

 

 

rotating tools!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Safety class II

 

 

 

 

 

 

 

 

 

 

 

Risk of fire!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Observe caution and safety notes!

 

 

 

 

 

 

 

 

 

 

 

Proper procedure and handling.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Risk of explosion!!

 

 

 

 

 

 

 

 

 

 

 

Dispose packaging and appliance in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

an environmentally-friendly way!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Modelling and engraving set

and sawing of wood, metal, plastic, ceramic or stone

PMGS 12

in dry rooms. Any other use or modification to the

 

 

 

 

 

 

 

 

 

 

 

drill / grinder shall be considered as improper use

Q Introduction

and could give rise to considerable dangers. The

manufacturer will not accept liability for loss or

 

 

 

 

 

 

 

 

 

 

 

damage arising from improper use. Not intended

 

 

 

 

 

 

 

 

Please make sure you familiarise yourself

for commercial use.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

fully with the way the device works before

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

you use it for the first time and that you

Q Features and equipment

 

 

 

 

 

 

 

 

understand how to handle electrical power tools

correctly. To help you do this please read the accom-

 

 

 

 

 

 

 

 

 

 

 

 

panying operating instructions. Keep these instructions

Small drill:

in a safe place. If you pass the device on to anyone

 

1

 

 

On / Off switch / Rotational speed control

else, please ensure that you also pass on all the

 

2

 

 

Metal stirrup hanger

documentation.

 

3

 

 

Plug for mains adapter

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

Clamping nut

Q Proper use

 

5

 

 

Spigot nut

 

6

 

 

Spindle lock

The small drill is to be used for drilling, milling, en- graving, polishing, cleaning up, grinding, separating

6 GB/IE/CY

Page 5
Image 5
Parkside PMGS 12 manual Introduction,  / Ah, Modelling and engraving set, Features and equipment, Proper use