General safety advice for electrical power tools

(by means of a mains lead) and electrical tools powered by rechargeable batteries (without a mains lead).

1. Workplace safety

a)Keep your working area clean and well lit. Untidy or poorly lit working areas can lead to accidents.

b)Do not work with the device

in potentially explosive envi- ronments in which there are

inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts or fumes.

c)Keep children and other

people away while you are operating the electrical tool.

Distractions can cause you to lose control of the device.

2. Electrical safety

a)The mains plug on the device must match the mains socket. The plug must not be modified in any way. Do not use an adapter plug with devices fitted with a protective earth. Unmodified plugs and matching sockets reduce the risk of electric shock.

b)Avoid touching earthed surfaces such as pipes, radiators, ovens and refrig- erators with any part of your body.

There is an increased risk of electric shock if your body is earthed.

c)Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock.

d)Do not use the mains lead for any purpose for which it was

not intended, e.g. to carry the device, to hang up the device or to pull the mains plug out of the mains socket. Keep the mains lead away from heat, oil, sharp edges or moving parts of the

device. Damaged or tangled mains leads increase the risk of electric shock.

e)When working outdoors with an electrical power tool always use ex- tension cables that are also approved for use outdoors. The use of an extension cable suitable for outdoor use reduces the risk of electric shock.

f)Use a residual current device (RCD) for protection if operating the electri- cal power tool in a moist environment is unavoidable. The use of an RCD reduces the risk of electric shock.

3.Personal safety

a)Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury.

b)Wear personal protective

equipment and always wear safety glasses. The wearing of

personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of elec- trical power tool used and work undertaken, reduces the risk of injury.

c)Avoid unintentional operation of the device. Check that the electrical power tool is switched off before you connect it to the mains, pick it up or carry it. Accidents can happen if you carry the device with your finger on the ON / OFF switch or with the device switched on.

d)Remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury.

e)Avoid placing your body in an unnat- ural position. Keep proper footing and balance at all times. By doing this you will be in a better position to control the device in unforeseen circumstances.

8GB/IE

Page 6 Page 8
Page 7
Image 7
Parkside PMGS 12 A1 General safety advice for electrical power tools, Workplace safety, Electrical safety, Personal safety
Page 6 Page 8

PMGS 12 A1 specifications

The Parkside PMGS 12 A1 is a versatile and efficient cordless angle grinder, specifically designed for both home improvement enthusiasts and professional users. This powerful tool is part of the Parkside range known for delivering quality and affordability, making it an excellent addition to any toolkit.

One of the standout features of the PMGS 12 A1 is its 12V lithium-ion battery system. This battery technology provides consistent performance and longevity, ensuring users can tackle a variety of tasks without interruption. The tool is lightweight, weighing in at just over 1.5 kilograms, which enhances maneuverability and reduces fatigue during extended use.

The angle grinder is equipped with a powerful motor that operates at a no-load speed of up to 19,500 RPM. This high RPM rate allows for efficient cutting, grinding, and polishing on various materials such as metal, stone, and even ceramics. Users will appreciate the tool's easy-to-use design, highlighted by its variable speed control feature that allows for optimal settings depending on the job at hand.

Safety is a key concern in power tools, and the PMGS 12 A1 incorporates several safety features. These include a protective cover that can be easily adjusted without tools, and a well-placed safety switch that prevents accidental activation. The ergonomic design of the tool allows for a comfortable grip, reducing strain during prolonged use.

Another notable aspect of the Parkside PMGS 12 A1 is its compatibility with a range of discs and attachments. Users can easily swap out grinding discs and cut-off wheels to suit their specific projects, enhancing the tool's versatility. This feature is especially beneficial for those who tackle various tasks around the home or on construction sites.

In conclusion, the Parkside PMGS 12 A1 stands out as a reliable, user-friendly cordless angle grinder. Its powerful motor, lightweight design, and safety features cater to both hobbyists and professionals. With its versatility in handling different materials and tasks, this tool represents an excellent balance of performance and practicality, making it a valuable asset for any DIY enthusiast or professional tradesperson.
Top Page Image Contents