Parkside PSBM 850 manual First use / Servicing and cleaning / Disposal / Information, Screwdriving

First use / Servicing and cleaning / Disposal / Information

Drilling:

jSet the drill / hammer-action switch 1 to the right into the position.

Impact drilling:

jSet the drill / hammer-action switch 1 to the left into the position.

Note: The hammer-action drilling mode is intend- ed for drilling into brick, concrete and stone only.

QScrewdriving

jThe screwdriver attachments and bits must match the screw head. Set the drill / hammer-action

switch 1 to the drill symbol and select 1st gear.

QServicing and cleaning

Warning! DANGER OF INJURY! Switch the device off and pull the plug out of the mains socket before carrying out any work on the device.

jDo not allow any liquids to enter the device. Use a cloth to clean the device.

jClean the device after you have finished using it.

jDo not under any circumstances use petrol or strong solvents.

jStore the device in a dry room.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out devices.

QInformation

QService centre

The service centre for your country is shown in the warranty documentation.

Warning! Have your device repaired only by qualified specialist personnel using original manufacturer parts only. This will ensure that your device remains safe to use.

Warning! If the plug or mains lead needs to be replaced, always have the replacement carried out by the manufacturer or his service centre. This will ensure that your device remains safe to use.

QDisposal

The packaging is wholly composed of environmentally-friendly materials that can be disposed of at a local recycling centre.

Do not dispose of electrical power tools with the household rubbish!

In accordance with European Directive 2002 / 96 / EC, worn out electrical power tools must be collected separately and taken for environmentally compatible recycling.

12 GB/IE/CY

E3334_PSBM 850_Content_LB6.indd 12

11.04.2008 13:28:30 Uhr