Use / Use of accessories, Changing a disc

and the working conditions and can be deter- mined by means of a practical test.

The table below shows some recommended settings (for guidance only and given without liability) for a number of common applications. The accessories mentioned may not all be sup- plied as standard with the product. Sawing stone is only permitted with the use of a cutting guide (accessory).

Preselected rotation speed:

Material	Application	Tool	Setting

Plastic,	Polishing	Lambswool	1
varnish		bonnet
	Fine ﬁnish	Felt polishing	1
		disc
Metal	Fine ﬁnish	Buﬃng disc	1

	Paint	Sanding sheet	2-3
	removal

Wood,	Brushing,	Cup brush,	3
metal	derusting	sanding sheet

Metal,	Grinding /	Grinding disc	4-6
stone	abrading

Metal	Roughing /	Roughing /	6
	grinding	grinding disk

Stone	Cutting	Cutting disc	6
		and cutting
		guide

Changing a disc

Always wear protective gloves when changing cutting or roughing / grinding discs.

Press the spindle lock button 9 only after the mounting spindle 7 has reached a standstill, Fig. A.

Press the spindle lock button 9 to block the drive.

Release the clamping nut 6 using the spanner 11 , Fig. B.

Place the roughing, grinding or cutting disc on to the mounting ﬂange 8 with its labelled side facing towards the device.

Then replace the clamping nut 6 , with its raised side facing upwards, on to the mounting spindle 7 .

Use / Use of accessories

Press the spindle lock button 9 to block the drive.

Tighten the clamping nut 6 again with the spanner 11 .

Note: Replace a new disc immediately if it runs unevenly or vibrates after being exchanged. After replacing a disc let the device run under no load for 30 seconds as a safety check. Look out for unusual noises or generation of sparks.

Check that all the fastenings are correctly attached.

Pay attention to see that the arrow showing the direction of rotation on the cutting or roughing / grinding discs (including diamond cutting discs) corresponds with the direction of rotation of the device (see arrow on the head of the device).

Use of accessories

Cutting / roughing discs

You can use the following cutting or roughing/ grinding discs with this device:

Dimensions:	ø 125 x 22,2 mm
	to max. 6 mm thick
	(depressed centre)
Speed:	12000 rpm

Circumferential speed: 80 m / sec

ø125 x 22.2 mm to max. 6 mm thick (depressed centre) 12000 rpm

80 m / sec

Flap discs for metal

Dimensions:	ø 125 mm
Speed:	min. 12000 rpm

GB/IE 15

PWS 125 A1 specifications

The Parkside PWS 125 A1 is a powerful and versatile angle grinder that has garnered attention for its impressive performance and user-friendly design. This tool is ideal for both DIY enthusiasts and professionals, offering a range of features that make it suitable for various grinding, cutting, and polishing tasks.

One of the main features of the Parkside PWS 125 A1 is its robust 1200-watt motor, which provides ample power for tough jobs. With a no-load speed of up to 11,000 RPM, this angle grinder ensures efficient and swift results, allowing users to tackle materials such as metal, stone, and concrete with ease. The 125 mm grinding disc diameter strikes an excellent balance between maneuverability and cutting depth.

Safety is a key consideration in the design of the PWS 125 A1. Equipped with a protective guard that can be easily adjusted without the need for tools, users can ensure their safety while working. The tool also features a soft-start function that reduces the risk of kickback during start-up, providing an added layer of security when working on various projects.

The ergonomic design of the Parkside PWS 125 A1 enhances user comfort, making it easier to handle for extended periods. The anti-vibration handle is designed to absorb vibrations, minimizing fatigue and ensuring stable control during operation. This makes it an excellent choice for users who may require extended periods of grinding or cutting.

The tool supports a variety of attachments, including different types of grinding and cutting discs, making it a versatile addition to any toolkit. This adaptability ensures that users can switch between tasks without investing in multiple tools. Additionally, the easily accessible spindle lock facilitates quick and hassle-free disc changes.

The innovative cooling system of the PWS 125 A1 is designed to prevent overheating during prolonged use, ensuring the longevity of the motor and the overall tool. This system promotes effective airflow, allowing the grinder to perform optimally even in demanding conditions.

Overall, the Parkside PWS 125 A1 stands out as an excellent combination of power, safety, and versatility. With its array of features and thoughtful design, it is a reliable tool for anyone looking to undertake a variety of grinding and cutting tasks, making it a valuable asset for both DIY projects and professional work. Whether for home improvement or industrial applications, this angle grinder delivers performance and reliability, ensuring user satisfaction.

Parkside PWS 125 A1 manual Use / Use of accessories, Changing a disc, Cutting / roughing discs

Models: PWS 125 A1