Parkside XQ600 manual Commissioning, Dust suction

To switch off intermittent operation mode:

jRelease the On / Off switch 2 .

Switching on for sustained operation:

jPress the On / Off switch 2 and, at the same time, secure it with the locking button 3 .

Switching off after sustained operation:

jPress the On / Off switch 2 and then release it.

Rotation preselection:

jSelect the desired rotation with the adjusting wheel rotation speed selector 5 .

DUO-START function / Reduced idling rotation speed:

The appliance is fitted with a reducer for the rotation speed when idling.The full motor performance resp. the preselected rotation speed becomes available with the additional activation of a DUO-START switch.

jActivate either the Front switch DUO-START10 or

the Hand switch DUO-START 1 (see Figs. A, B, C). This makes possible a gentler touch down onto the work piece.

Note: The front switch DUO-START10 springs back into the starting position on being released.

QDust suction

Warning! Fire hazard! A risk of fire exists when working with electrical appliances that have a dust collection box or can be connected to an external collection unit via a dust suction adapt- er! Under unfavourable conditions, such as flying sparks, grinding of metal or metal remnants in wood, the wood dust in the dust sack (or in the dust sack of a vacuum cleaner) can ignite.This can hap- pen especially if the wood dust has paint particles on it or is mixed with other chemical substances and the material being sanded is hot after extensive working. You should therefore avoid an overheat- ing of the items being sanded, as well of as the ap- pliance itself, and always empty the dust collection box or the dust bag of the suction unit before work pauses.

Commissioning

Wear a dust protection mask!

Warning! Before carrying out work on the appliance, always remove the plug from the power socket.

Installing the suction ring:

The suction ring 7 makes possible an optimal dust suction.

jPlace the suction ring 7 in the housing guide. Close the clamp bracket on the housing rear side.

Dust suction with the dust collection box:

jSlide the dust collection box 4 onto the adap- tor opening on the appliance rear side.

Emptying the dust collection box:

jPress the release buttons 6 on both sides, then remove the dust collection box 4 from

the appliance.

Note: To maintain an optimal suction perform- ance, empty the dust collection box 4 regularly.

Adapter for external suction (Fig. D) Connection:

jSlide the adaptor for external suction 11 exactly and completely onto the adapter opening on the appliance rear side.

jSlide the tube of an authorised dust collection unit (e.g. a workshop vacuum cleaner) onto the adaptor for external suction 11

Removal:

jRemove the tube of the dust collection unit from the adaptor for external suction 11

jPress both release buttons and remove the adaptor for external dust collection 11 from the appliance.

GB 11