FITTING 
If your CK3000 EVOLUTION is installed by a professional, skip directly to the next chapter, entitled «Getting Started».
The CK3000 EVOLUTION comprises an electronic control unit, a microphone, a
Electronic control unit:
Do not install the control unit near the vehicle’s heater or air conditioning unit.
Protect the unit from direct exposure to sunlight. Avoid enclosing the unit inside the vehicle’s metal wings or panels, which could affect the quality of the Bluetooth® link.
Microphone:
The microphone must be pointed towards the driver and preferably fitted between the sun visor and the
Keypad:
You are advised to fit the keypad where it can easily be reached, preferably on a flat surface that has first been cleaned.
Connect the mute cable to the CAUTION connector provided on the keypad.
Ensure that the red and green LEDs light up and switch off according to the position of the key in the ignition.
Connecting the mute cable and power supply cable:
The mute cable is fitted with black ISO connectors.
The power supply cable is fitted with grey ISO connectors.
Car stereo with ISO plugs:
Disconnect the car stereo’s audio and power leads.
Join the female connectors of the mute cable and power supply cable to the car stereo.
Join the vehicle’s audio and power cables to the male connectors.
Português Deutsch Nederlands Italiano Español Français English
CK3000 EVOLUTION | 7 |
|
