ENGLISH

13

MENU

The Main Menu consists of the following 4 sections:
"Phone Book", "Parameters", "Keywords" and " Reset memory". You can access the menu items by selecting the desired
menu item using the key and confirm by pressing "Yes".
In the phone Menu go to “Extras” for T39/T39m/R520m, or “Connect” for T68/T68m/T68i/T610/T616/T618/Z600/Z608.
Press Until “Accessories” and press on «Yes».
"Parrot Menu" is displayed, click "Yes"; menu headings are displayed.
Phone book:
• List: Displays the list of names in your phone book. Names with associated active voice tags are preceded by an asterisk (*).
• To learn or relearn a name, highlight the desired name and press "Yes" to confirm.
• Search: allows you to look for a name by its first letter(s). To do this, type a letter and confirm by pressing "Yes".
Parameters:
• Volume : This function adjusts the volume of CK3000. Click Yes and adjust using or . Press "Yes" to confirm.
• Auto answer : This function enables or disables automatic answering of incoming calls. Click “Yes”, and then
select "Enable" or "Disable".
• User : When several telephones are connected to CK3000, this function identifies the telephone with priority.
The phone with the highest priority is the first phone to which the kit tries to connect to.
o Click Yes, "Main user?" is displayed, confirm.
• Caller ID : This function lets you know the identity of the caller. With this function enabled, when you receive a
call, the name of the person calling you is pronounced if it is already stored in your phone book and corresponding
voice tag is assigned. Click Yes and select "Enable" or "Disable".
• Multi-tel : This function is available for Ericsson and Sony Ericsson phones equipped only with the "Headset"
profile. The affected phones are Ericsson R520, T39, T68m and the first Sony Ericsson T68i phones (software
version lower than R2E). This option allows the simultaneous use of these different phones during a single session of
use. The first phone getting connected to the CK3000 is the main phone for the use session of the car-kit (until
extinction). If the option "Multi-Tel" is activated for this phone, the CK3000 will accept incoming calls from the other
phones if they were previously paired with the CK3000.
ATTENTION : The "Multi-Tel" function is now compatible with the T68i, T610, T616, T618, Z600 and Z608 (with
specific software versions - see “Phone configuration” page 12). This function is available when the
"Powersave" mode is activated in the phone, i.e. ”Headset” profile mode (see “Phone configuration” page 12).
Once this mode activated, the CK3000 has to identify every phone in this new mode. It should be necessary to
connect separately each phone with the CK3000 and restarting it between each identification.
Voice recognition:
• Tel N°: Keywords for calling V-Cards (“Home”, “Work” and “Cellular”) can be accessed by clicking "Yes", Tel.
N°. The voice recognition learning sequence is exactly the same as the one for the names.
• Keywords : Key words are “Phone” and “Hang Up”. You need to record your own keywords for use with
“Wordspotting” option.
• Wordspotti ng : If activated, enables use of keywords to make a call and to hang up.
- Activated: use keywords or buttons
- Deactivated: use buttons only
• Pers. Dic : The keywords are pre-recorded in the car kit for French language only (the language is determined
by the language used by the menus of the phone). You need to activate this option if you want to use your own
recorded keywords.
Erasing the Memory:
Click "Yes", and "Clear memory?" is displayed.
Confirm by pressing "Yes" and "Memory erasing in progress. Please wait!" - is announced. To cancel, press "No".
It is possible to erase the memory and reset the system without using the Parrot menu. To do this, hold the red and the
green buttons together.
For more information, refer to the instructions of your Ericsson or Sony Ericsson user’s guide.
ERICSSON & SONY ERICSSON