Pass Labs pre-amplifier owner manual X0.2 Specifications

X0.2 Specifications

X0.2 Owner’s Manual

All figures obtained after 1 hour warmup, with regulated 120 VAC power line. See manual notes about AC power line regulation.

Gain, Balanced	12 dB Bal in, Bal output
Gain, single-ended	12dB unbal in, unbal output
Freq. Response	-3 dB @ 2 Hz
	-3 dB at @ 100 kHz
Distortion @ 1KHZ	< .1 % THD, typ .003% @ 2v
Maximum Output	20 volts rms bal out
	7 volts rms unbal out
Output Impedance	200 ohms unbalanced
	750 ohms balanced
Input Impedance	10K ohm unbalanced
	20K ohm balanced
CMRR	typ. -80 dB, 20 - 20kHz
Crosstalk	typ. -90 dB, 20 - 20kHz
Output Noise floor	< -110 dBV, 20 - 20kHz
Extl amp turn on	12 volts DC 50 mA continuous
Power Consumption	35 watts
Dimensions	17” W x 3.5”H x 13 “D each
Shipping Weight	70 pounds in packing carton,
	3 units

For more information please contact:

Pass Laboratories Inc.

P.O. Box 219,

24449 Foresthill Rd.,

Foresthill, CA 95631

Tel: 530.367.3690

Fax: 530.369.2193

www.passlabs.com

© 2006 Pass Laboratories Inc.

“Pass”, “pass”, “Pass Labs”, “Pass Laboratories”, Supersymmetery”, “Aleph”, and “Zen” and are all registered trademarks of Pass Laboratories, Inc., and all rights thereto are protected by law.

10