Manuals / Pass Labs / Home Audio / Speaker

Pass Labs SR-1 owner manual

Models: SR-1

1 14
Download 14 pages 17.8 Kb
Page 6
Image 6

SR-1 Owner’s Manual

with common metric hardware on the underside of the upper cabinet. The hardware and required tools are supplied with each cabinet. Please retain the packing materials and supplied tools.

Customer will need to install the “Tilt Bar” and the “Nameplate” and 3 feet. Like the larger bottom cabinet the feet on the upper cabinet have “no-mar” washers between the aluminum hardware and the cabinet finish. To preserve the wood finish on the cabinet, please install these washers. Once this hardware has been installed you may invert the smaller box, such that the top cabinet is now setting upright on a secure surface. Once upright, lift and remove the outer and inner box, foam top tray and foam sock. You may now place the top cabinet upon the bass cabinet.

When stacking the small cabinet atop the large cabinet it is suggested that this be done with the assistance of a second person. One person should lift the upper cabinet and a second person should direct and guide the upper cabinet so that the feet of the small upper cabinet fit directly into the sockets on top of the large cabinet without damaging the finish on any of the pieces.

The Upper and Lower speaker cabinet each have input connectors and it is strongly suggested that the customer bi-wire the speakers with wire of their choice. Speaker wire is a very personal choice, please discuss cable options with your dealer if you do not already own cables that you favor. Pass Laboratories has included a set of jumper cables to allow temporary operation of the speakers with a single run of speaker cable. Extended listening sessions with SR-1 favor bi-wiring or bi-amping. For those so inclined you are also free to bi-amp with dedicated amplifiers allowing the freedom to select separate amplifiers for woofer and tweeter.

On the large, lower cabinets the two pairs of speaker binding posts are in parallel with one another. When wiring with a single pair of speaker cables the lower pair are intended for the run back to the power-amplifier and the upper pair are intended for the jumpers that will connect the power amplifier supplying the lower cabinet to the input connectors of the upper cabinet.

6

Page 5 Page 7
Page 6
Image 6
Pass Labs SR-1 owner manual
Page 5 Page 7

SR-1 specifications

The Pass Labs SR-1 is an outstanding addition to the elite category of high-performance audio components. Designed by renowned audio engineer Nelson Pass, the SR-1 represents a culmination of decades of innovation and expertise in the field of high-fidelity sound reproduction. Known for its exceptional sound quality and advanced engineering, the SR-1 is a top choice for audiophiles and music enthusiasts alike.

One of the defining features of the SR-1 is its innovative circuit design. The amplifier employs a Class A topology, which is renowned for its ability to produce an incredibly detailed and warm sound. This design minimizes crossover distortion and ensures that audio signals retain their integrity, resulting in an immersive listening experience. The amplifier’s robust power supply further enhances performance, providing ample current delivery to handle dynamic peaks without compromising sound quality.

The SR-1 also integrates advanced thermal management technologies. With large heat sinks and a well-ventilated chassis, the amplifier can operate efficiently, avoiding overheating even during extended periods of use. This feature not only enhances reliability but also ensures that sound performance remains consistent over time.

Another key aspect of the SR-1 is its flexibility in connectivity options. The amplifier features multiple input selections, accommodating various sources such as CD players, turntables, and streaming devices. The SR-1 is engineered to deliver a wide range of impedance matching, allowing users to connect it seamlessly with different kinds of speakers, ensuring compatibility and optimal performance.

The aesthetics of the SR-1 are equally impressive. With a sleek aluminum chassis and elegant design, it not only fits well in any audio setup but also stands as a statement piece in home entertainment systems. The controls are user-friendly, providing easy access to essential functions such as volume adjustments and input selections.

In summary, the Pass Labs SR-1 is a true testament to high-end audio engineering. Its combination of Class A amplification, exceptional build quality, advanced thermal management, and versatile connectivity makes it a standout choice for those seeking unparalleled sound quality. Whether used in a casual listening environment or a serious audiophile setup, the SR-1 delivers a captivating audio experience that captures the essence of music.