▲CAUTION: THE ROTOR WILL ! COAST EVEN AFTER THE MOTOR IS OFF. MAKE SURE THE ROTOR STOPS TURNING, THEN DISCONNECT THE PLUG FROM THE MOTOR BEFORE ATTEMPTING ANY MAIN- T E N A N C E O R C L E A N - O U T PROCEDURE. IF THE ROTOR IS STILL TURNING, IT MAY CAUSE
SERIOUS PERSONAL INJURY.
31 Nut
33 Washer
32 Screw
page 21
31
33
32
Detail of the shredder hopper.
31 Nuts (outside)
32 Screws (inside)
33 Washers (inside)
Both the shredder hopper and the chipper cone are assembled with the same hardware and wrench.
2139
bearing
set
screw
lock
collar
30
2729
Detail of the outboard bearing assembly. The bearing is sealed and does not need lubrication.
