Patton electronic 07MOS10xx-QS quick start Additional Information, Customer and Technical Support

3.2 Saving the System Configuration

To save the system configuration to the flash memory, follow these steps:

1.Select the SYSTEM folder from the OnSight DM web-based GUI navigation menu.

2.From the expanded SYSTEM folder, select the Actions folder.

3.From the expanded Actions folder, select Save Configuration.

A warning window opens to alert you to the start of the save-configuration process. Click on OK to continue or Cancel to cancel the request.

4.0 Additional Information

The system is now ready for operation using the OnSight DM web-based graphical user interface (GUI). You may now configure the system clock, timing mode and STM-1 interface settings for your intended application.

Refer to the OnSite Series Getting Started Guide and the OnSite Series Administrator’s Reference Guide located on the CD-ROM shipped with your device.

A.0 Customer and Technical Support

Online support: www.patton.com

E-mail support: support@patton.com—answered within 1 business day

Telephone support:

•Standard: +1 (301) 975-1007 (USA), Monday–Friday: 8:00 am to 5:00 pm EST (1300 to 2200 UTC/GMT)

•Alternate: +41 (0)31 985 25 55 (Switzerland), Monday–Friday: 8:00 am to 5:00 pm CET (0900 to 1800 UTC/GMT)

Fax: +1 (253) 663-5693 (USA) or +41 (0)31 985 25 26 (Switzerland)

Copyright statement

Copyright © 2009, Patton Electronics Company. All rights reserved.

The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document.

In accordance with the requirements of council directive 2002/96/EC on Waste of Electrical and Electronic Equipment (WEEE), ensure that at end-of-life you separate this product from other waste and scrap and deliver to the WEEE collection system in your country for recycling.

4 OnSite Series Quick Start Guide