Patton electronic 1010A user manual Appendix D, Block Diagram, Radio And Tv Interference, Service

APPENDIX D	1.0 WARRANTY INFORMATION
BLOCK DIAGRAM	Patton Electronics warrants all Model 1010A components to be
	free from defects, and will—at our option—repair or replace the product
	should it fail within one year from the first date of shipment.
	This warranty is limited to defects in workmanship or materials, and
	does not cover customer damage, abuse or unauthorized modification.
	If this product fails or does not perform as warranted, your sole
	recourse shall be repair or replacement as described above. Under no
	condition shall Patton Electronics be liable for any damages incurred
	by the use of this product. These damages include, but are not limited
	to, the following: lost profits, lost savings, and incidental or
	consequential damages arising from the use of or inability to use this
	product. Patton Electronics specifically disclaims all other warranties,
	expressed or implied, and the installation or use of this product shall be
	deemed an acceptance of these terms by the user.
	1.1 RADIO AND TV INTERFERENCE
	The Model 1010A generates and uses radio frequency energy, and
	if not installed and used properly—that is, in strict accordance with the
	manufacturer's instructions—may cause interference to radio and
	television reception. The Model 1010A has been tested and found to
	comply with the limits for a Class A computing device in accordance
	with the specifications in Subpart J of Part 15 of FCC rules, which are
	designed to provide reasonable protection from such interference in a
	commercial installation. However, there is no guarantee that
	interference will not occur in a particular installation. If the Model
	1010A does cause interference to radio or television reception, which
	can be determined by disconnecting the RS-232 interface, the user is
	encouraged to try to correct the interference by one or more of the
	following measures: moving the computing equipment away from the
	receiver, re-orienting the receiving antenna, and/or plugging the
	receiving equipment into a different AC outlet (such that the computing
	equipment and receiver are on different branches).
	1.2 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Service at (301) 975-1007. Packages received without an RMA number will not be accepted.

Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Model 1010A. Technical Service hours: 8AM to 5PM EST, Monday through Friday.

12 1