Patton electronic 1068 VDSL Product Related Questions, How is the Vdsl connection established?

Models: 1068 VDSL

1 5
Download 5 pages 46.98 Kb
Page 2
Image 2

FAQs

Product Related Questions

How is the VDSL connection established?

Four steps are required to establish a communications link between the two Model 1068 Ethernet Extenders (Local and Remote) and the respective network devices.

1)Connect the 10/100Base-TX devices to the Ethernet port of each 1068 unit.

2)Connect the POTS/ISDN device to the POTS/ISDN port of each 1068 unit (1068DV only)

3)Connect each end of the twisted-pair wire to the Link port of each 1068 unit.

4)Plug the 1068 power supplies into a suitable power source.

5)Plug the output jack of each power supply to the rear power jack of each 1068 unit.

Once powered up, a communications link is established between the two 1068 units and the VDSL LED on each 1068 unit will glow solid green.

NOTE: If line rates are changed from their original settings, both CO (Central Office) and CP (Customer Premise) units must be set to the same line rate/dip switch settings.

Does the Model 1068 include any management capabilities or test modes?

No, the Model 1068 does not have any management capabilities or test modes. However, it does feature seven status LED indicators to provide operational status at a glance and assist with troubleshooting.

Why does the Model 1068 VDSL QOL/error light occasionally flash?

When the QOL/"error” LED flashes it signifies that error correction is taking place and data integrity is maintained. It is possible for the error light to be constantly lit and the link will still function with data intact. However, when the QOL/Error LED is continuously lit, the 1068’s are approaching their maximum distance capabilities under the current environment and line rate. When the QOL is constantly lit, we recommend switching the modem to a lower line rate to ensure the most reliable connection.

What are the distance limitations of the Model 1068 using different gauge wires?

At the default setting of 12.5 Mbps symmetrical, using 24 AWG (0.5 mm) wire, the Model 1068 is capable of providing Ethernet extensions up to 4,656 ft (1.42 km) including the potential 328 ft (100 m) Ethernet connections on both ends of the communications link. Using 26 AWG (0.4 mm) wire, the Model 1068 is capable of providing Ethernet extensions up to 3,856 ft (1.18 km). Actual distance and link performance will vary based on the environment (cross talk/noise) and type/gauge of wire used. The chart below shows an example of how the gauge of wire affects the distance.

Approximate Distances at 12.5 Mbps (Default Setting)

Wire Gauge: AWG (mm)

Distance: Feet (km)

26

AWG (0.4 mm)

3856’ (1.18 km)

24

AWG (0.5 mm)

4656’ (1.42 km)

22

AWG (0.64 mm)

5256’ (1.60 km)

20 AWG (0.81 mm)

5556’ (1.69 km)

18 AWG (1.00 mm)

5756’ (1.75 km)

16 AWG (1.29 mm)

5856’ (1.78 km)

 

 

2

Page 2
Image 2
Patton electronic 1068 VDSL manual Product Related Questions, How is the Vdsl connection established?

1068 VDSL specifications

Patton Electronic's 1068 VDSL is a high-performance device specifically designed to meet the demands of modern telecommunications environments. Utilizing very-high-bit-rate digital subscriber line (VDSL) technology, the 1068 model excels in providing efficient data transmission over existing copper telephone lines, significantly enhancing broadband service delivery.

One of the standout features of the Patton 1068 VDSL is its exceptional data rates. The device can achieve upstream speeds of up to 100 Mbps and downstream speeds that can also reach similar levels under optimal conditions. This makes it ideal for service providers looking to offer high-speed internet access to residential and business customers, particularly in areas where fiber deployment is challenging or cost-prohibitive.

The 1068 VDSL incorporates advanced PAM-16 modulation technology, which enables it to transmit more bits per symbol. This results in greater efficiency and maximizes the use of available bandwidth. Furthermore, the device supports both ADSL and VDSL protocols, allowing for versatile operation across different network configurations.

One of the key characteristics of the Patton 1068 is its ease of installation and management. It features a user-friendly web-based interface that simplifies configuration, monitoring, and troubleshooting tasks. This allows service providers to reduce deployment time and operational costs while ensuring an optimal user experience.

The 1068 VDSL also boasts enhanced reach capabilities, achieving transmission distances of up to 1,500 meters under optimal conditions. This extended range makes it particularly advantageous for connecting remote locations that might be far from a central office.

In terms of reliability, this device is equipped with robust error correction techniques and quality of service (QoS) features, ensuring stable and uninterrupted connectivity. It supports a variety of service-level agreements (SLAs) to accommodate diverse customer needs.

In conclusion, the Patton Electronic 1068 VDSL is a versatile and powerful solution for addressing the growing demand for high-speed internet services. Its combination of high data rates, extended reach, easy management, and reliable performance makes it an attractive option for telecommunications providers seeking to enhance their offerings and improve customer satisfaction. With its ability to leverage existing infrastructure, the 1068 VDSL represents a significant advancement in broadband technology, helping to bridge the digital divide in underserved areas.