Figure 7. Single-mode fiber connectors (FC and SC)

.

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser radiation exposure.

Caution

4.3 POWER CONNECTION

The Model 1194 is available with two power supply options:

•Universal Interface AC Power Supply option (Model 1194-UI) oper- ates in environments ranging from 100 to 240 VAC, with no re-configu- ration necessary (see Appendix B for available domestic and international power cords).

•DC Power Supply option (Model 1194/48) operates in 48 VDC (36– 60 VDC) environments and is equipped with a 3-pin “terminal strip” style connector.

Connecting to an AC Power Source

The Universal Interface AC Supply is equipped with a male IEC-320 power connection. A domestic (US) power supply cord is supplied with the unit at no extra charge. To connect the standard or universal power supply, follow these steps:

1.Attach the power cord (supplied) to the shrouded male IEC-320 con- nector on the rear of the Model 1194.

2.Plug the power cord into a nearby AC power outlet.

15